Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
USB-FDD Select your boot device priority by USB-FDD. USB-ZIP Select your boot device priority by USB-ZIP. USB-CDROM Select your boot device priority by USB-CDROM. USB-HDD Select your boot device priority by USB-HDD. LAN Select your boot device priority by LAN. Disabled Select your boot device priority by Disabled. English -29 -BIOS Setup EnglishEnglish Boot Up Floppy Seek During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks. Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360 K. (Default value) Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all 80tracks. GA-8ST667 Series Motherboard - 30 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Integrated Peripherals IDE1 Conductor Cable IDE2 Conductor Cable On-Chip Primary PCI IDE On-Chip Secondary PCI IDE AC97 Audio USB Controller USB Legacy Support Onboard LAN device* Init Display First Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA Game Port Address Midi Port Address Midi Port IRQ [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [AGP] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] 3 [201] [330] [10] Item Help Menu Level • [Auto] Auto-detect IDE cable type [ATA66/100/133] Set Conductor cable to ATA66/100/133(80 -pins) [ATA33] Set Conductor cable to ATA33(40-pins) • ........: Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Fail-Safe Defaults ESC:Exit F1:General HelpF7:Optimized Defaults Figure 4: Integrated Peripherals IDE1 Conductor Cable Auto Will be automatically detected by BIOS. (Default Value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable is compatible with ATA66/100/133). ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). English * Only for GA-8ST667-L. -31 -BIOS Setup EnglishEnglish IDE2 Conductor Cable Auto Will be automatically detected by BIOS. (Default Value) ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable is compatible with ATA66/100/133). ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). On-Chip Primary PCI IDE Disabled Disable onboard 1st channel IDE port. ..Enabled Enable onboard 1st channel IDE port. (Default value) On-Chip Secondary PCI IDE Disabled Disable onboard 2nd channel IDE port. Enabled Enable onboard 2nd channel IDE port. (Default value) AC97 Audio Enabled Enable auto detect onboard AC'97 audio. (Default value) Disabled Disable this function. USB Controller Disable this function if you are not using onboard USB feature. Disabled Disable USB Controller. Enabled Enable USB Controller. (Default value) USB Legacy Support When USB keyboard or mouse is installed, please set at Enabled. Disabled Disable USB keyboard or mouse Support. (Default value) ..Enabled Enable USB keyboard or mouse support. Onboard LAN device* Enabled Enable Onboard Lan Chip function. (Default Value) Disabled Disable this function. * Only for GA-8ST667-L. GA-8ST667 Series Motherboard - 32 Init Display First Select the first initation of the monitor display from AGP or PCI VGA card. PCI Set Init Display First to PCI. AGP Set Init Display First to AGP. (Default value) Onboard Serial Port 1 Disabled Disable onboard Serial port 1. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8, using IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8, using IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8, using IRQ3. Auto BIOS will automatically setup the port 1 address. Onboard Serial Port 2 Disabled Disable onboard Serial port 2. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8, using IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8, using IRQ4. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8, using IRQ3. Auto BIOS will automatically setup the port 2 address. Onboard Parallel port This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller. Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378, using IRQ7. (Default Value) 278/IRQ5 Enable onboard LPT port and address is 278, using IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC, using IRQ7. English -33 -BIOS Setup English Parallel Port Mode This feature allows you to connect with an advanced printer via the port mode it supports. SPP Using Parallel port as...