Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Options are: Auto (default), CHS, LBA, Large. IDE Channel 2, 3 Master/Slave ►► Extended IDE Drive Configure your IDE/SATA devices by using one of the two methods below: • Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) • None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. ►►Access Mode Sets the hard drive access mode. Options are: Auto (default), Large. The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. ►► Capacity Approximate capacity of the currently installed hard drive. ►►Cylinder Number of cylinders. ►► Head Number of heads. ►► Precomp Write precompensation cylinder. BIOS Setup - 42 - ►► Landing Zone Landing zone. ►► Sector Number of sectors. Drive A Allows you to select the type of floppy disk drive installed in your system. If you do not install a floppy disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5", 1.44M/3.5" 2.88M/3.5". Floppy 3 Mode Support Allows you to specify whether the installed floppy disk drive is 3-mode floppy disk drive, a Japanese standard floppy disk drive. Options are: Disabled (default), Drive A. Halt On Allows you to determine whether the system will stop for an error during the POST. ►►All Errors Whenever the BIOS detects a non-fatal error the system boot will stop. ►► No Errors The system boot will not stop for any error. ►►All, But Keyboard The system boot will not stop for a keyboard error but stop for all other errors. (Default) ►►All, But Diskette The system boot will not stop for a floppy disk drive error but stop for all other errors. ►►All, But Disk/Key The system boot will not stop for a keyboard or a floppy disk drive error but it will stop for all other errors. Memory These fields are read-only and are determined by the BIOS POST. ►► Base Memory Also called conventional memory. Typically, 640 KB will be reserved for the MS-DOS operating system. ►► Extended Memory The amount of extended memory. ►► Total Memory The total amount of memory installed on the system. - 43 - BIOS Setup 2-5 Advanced BIOS Features cr Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key <+> (or