Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
In addition, Ultra TPM's key backup function allows users to still have a way to access their data in case the keys are lost. • After creating the password(s) and key(s) associated the TPM, be sure to store them in a secure location and back them up. Loss of the password(s) or the key(s) will render the files encrypted via the TPM unable to be cracked or read. • Though the TPM delivers the latest data security technology, it does not guarantee data integrity or give hardware protection. GIGABYTE is not liable for loss of encrypted data as a result of hardware damage. A. Before installing Ultra TPM, follow the steps below in sequence: Step 1: Turn on your computer and enter the BIOS Setup program. Go to Security Chip Configuration and set Security Chip to Enabled. Then enter Clear Security Chip to clear all settings in the TPM chip. (Refer to Chapter 2, "BIOS Setup," for more information.) Save changes and then restart your computer. /?\ Encrypted files will become inaccessible after the TPM chip is cleared. Be sure to back up the encrypted files first. CAUTION Step 2: Install the Infineon TPM driver from the motherboard driver disk (select Infineon TPM Driver). Step 3: Install the Ultra TPM utility from the motherboard driver disk (select Ultra TPM). B. Instructions for using Ultra TPM: 1. Before launching Ultra TPM, go to the Infineon Security Platform Settings Tool to initialize the TPM chip and then encrypt the files you want. (You have to at least set up a Personal Secure Drive (PSD). Refer to the Infineon Security Platform Help file to see how to set up the PSD.) 2. The Ultra TPM utility appears in the system tray after it is installed. To create a TPM key and save it to USB flash drive(s), right-click on the Ultra TPM icon ** and select Initialize. A screen in Figure 1 will appear. Select a USB flash drive and click the Enable Backup to BIOS(Note 2) check box, or select at least two USB flash drives. Click OK and then enter the user password(Note 3) created with Infineon Security Platform Settings Tool. Click OK to store the key on your USB flash drive or in the BIOS. /j\ DO NOT turn off or restart the computer when a TPM key is being created. CAUTION After completing the settings and when removing the USB flash drive(s), the Infineon Security Platform Settings Tool will give the following warning message, which is normal. . ‘4j A feature needs reconfiguration. Figure 1 Click here to reconfigure your Security Platform Features, To duplicate a TPM key to another USB flash drive, right-click on the Ultra TPM icon ** and select Duplicate. A screen in Figure 2 will appear. Select the drive letter of the source USB flash drive and then select the drive letter of the destination USB flash drive. Click OK to complete. Figure 2 (Note 1) This feature is optional due to different regional policy. (Note 2) When more than one user stores their TPM keys in the BIOS, the latter key will replace the former key. (Note 3) If you incorrectly enter the password three times, Ultra TPM will be locked. To be able to enter the password again, go to the Security Chip Configuration menu in BIOS Setup and then set Security Chip to Enabled/Activate. (Note 4) If you want to uninstall the Ultra TPM utility, be sure to insert the USB flash drive containing the TPM key into your computer before the uninstallation. - 81 - Unique Features 4-6 Q-Share Q-Share is an easy and convenient data sharing tool. You are able to connect your computer to another computer simply using Q-Share without making complicated settings. GIGABYTE g Q-Share Ver.l .0 Directions for using Q-Share After installing Q-Share from the motherboard driver disk, go to Start>AII Programs>GIGABYTE> Q-Share.exe to launch the Q-Share tool. Find the Q-Share icon in your system tray and right-click on this icon to configure the data sharing settings. Enable Incoming Folder... Open Incoming Fold« : C:\Q-StwicFold« Clung« Incoming Fdd«f : C:\Q-ShweFolde Figure 1. Data Sharing Disabled Figure 2. Data Sharing Enabled Options Descriptions Option Description Connect ... Displays the computers with data sharing enabled Enable Incoming Folder ... Enables data sharing Disable Incoming Folder ... Disables data sharing Open Incoming Folder : C:\Q-ShareFolder Accesses the shared data folder Change Incoming Folder : C:\Q-ShareFolder Changes the data folder to be shared (Note) Update Q-Share ... Updates Q-Share online About Q-Share ... Displays the current Q-Share version Exit... Exits Q-Share (Note) This option is available only when data sharing is NOT enabled. GA-EP45-DQ6 Motherboard - 82 - 4-7 Time Repair Based on the Microsoft Volume Shadow Copy Services technology, Time Repair allows you to quickly back up and restore your system data in the Windows Vista operating system. Time Repair supports NTFS file system and can restore system data on PATA and SATA hard drives. System Restore Choose a system restore point using the navigat...