Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Panasonic Dateigröße: 442 kb Dateiname: ER147.PDF Unterrichtssprache:

Charge for 12 hours before using the clippers for the first time in order to activate the built-in rechargeable battery. The clipper can be operated on either an AC power source or a rechargeable battery. Read all instructions cafefully before use. Parts identification ® Blade ©Attachment mounting © Head Block © Body ©Indicator lamp © Switch ©5/8”{15mm) -11/16”(18mm) comb attachment ®3/8”(9mm) -1/2”(12mm) comb attachment CD 1/8”(3mm) •1/4”(6mm) comb attachment © Moving blade ©Fixed blade © Lever for cleaning ©AC adaptor (RE5-70) © Electric cord ©Oil ©Cleaning brush Before use Before using each time, apply the oil at the places marked with arrows in Fig. 10. How to use cCharging instructions> 1) Set the switch to “0-charge”, and plug the cord into the clipper body. (Fig. 1) 2) Plug the AC adaptor into an AC outlet. The charging indicator lamp will light up. (Fig. 2) 3) When charging is completed unplug the AC adaptor from an AC outlet. The charging time is 4 hours; 1 full charge will provide approximately 60 minutes of continuous operation. 1) Connect the AC adaptor to the body in the same way as for charging, and set the switch to “1" to use the clipper. 2) If the AC adaptor is connected while the switch is in the “1” position, the clipper may not operate. If this occurs, set the switch to the ‘‘0-charge” position, wait about 1 minute and then set it back to the “1 ” position. 3) Be sure to set the switch to “0-charge" when finished using the clipper. If the switch is left in the “1” position, the rechargeable battery will become completely discharged, shortening the life of the battery. 1) There are 3 comb attachments: one for 1/8” and 1/4”, one for 3/8” and 1/2”, and one for 5/8” and 11/16”. The cutting heights are indicated on the insides and sides of the attachments, so be sure to look for the height indication in order to mount the attachment correctly for the desired cutting height. (Fig. 3) 2) The comb attachments can be easily mounted by first hooking the attachment, fixing one side to Attachment mounting (B), and then fixing the other side by sliding it along the slot in the direction indicated by the arrow in Fig. 4. 3) To remove the comb attachment, turn the clipper body over and push the corner of the comb part of the back of the attachment in the direction indicated by the arrow in Fig. 5. When doing this, catch the attachment with your other hand. (Fig. 5) 1)Hold the clipper body with the on-off switch facing upward and push the blade with your thumb in the direction indicated by the arrow. When doing this, catch the blade in your other hand. Be sure the switch is set to “O-charge" before attempting to remove the blade. (Fig. 6) 2) To remount the blade, fit the mounting hook into the blade mounting on the clipper body and push in until it “clicks”. (Fig. 7) Life of the blade and battery 1) Although the blade life will vary in accordance with the frequency and conditions of use, when used for five haircuts (approximately 12 minutes each) a day, it should normally be possible to use the blade for approximately one year. However, in order to maintain the cutting performance of the blade, it is important to apply the oil before and after each use. 2) If the cutting performance of the blade deteriorates and cannot be restored by cleaning or applying the oil, it indicates that the blade has exceeded its useful life, and that it is time to replace it. Although the battery life will vary in accordance with the frequency and conditions of use, when charged everyday, it should normally be possible to use the battery for approximately 1 year. If the rechargeable battery is not charged for longer than 6 months, it will self-discharge, resulting in a shortening of its life. Therefore, even if the clipper is not being used, be sure to recharge the battery at least once every 6 months. If the clipper can be operated for only about 10 minutes after it has been correctly recharged for 4 hours, it indicates that the battery has exceeded its useful life and that it is time to replace it. 6 Blade Maintenance 1) Unplug the power cord and use the cleaning brush to remove the cut hairs from the clipper body and from around the blade (Fig. 8) 2) Remove the blade and brush off the cut hairs from the blade edge. 3) Brush the cut hairs out from the gap between the fixed blade and the moving blade. Press down on the lever for cleaning in order to raise the moving blade, and brush the cut hairs out from the gap between the blades. (Fig. 9) 4) Apply a few drops of the oil to the points indicated by the arrows in Fig. 10. 5) Remount the blade on the clipper body. Special attention when charging • Avoid charging the battery at temperatures below 0°C or above 40°C. • Avoid charging the battery in direct sunlight or n...

Herunterladen

Geben Sie zwei Ziffern: