Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Homelite Dateigröße: 3.45 mb Dateiname: Unterrichtssprache:

Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS Page Page FFEEAATTUURREESS PRODUCT SPECIFICATIONS Weight (dry) MightyLite 26CS....................................................................................................................................................7.9 lbs. MightyLite 26SS.....................................................................................................................................................8.7 lbs. String cutting width.........................................................................................................................................................17 in. Engine displacement........................................................................................................................................................26cc String diameter............................................................................................................................................................ .080 in. throttle trigger starter grip drive shaft housing single line string head curved shaft grass deflector MightYLite 26CS Fig. 1 rear handle front handle straight shaft grass deflector mightylite 26ss choke dial primer bulb choke dial primer bulb starter grip throttle trigger front handle rear handle drive shaft housing DUAL line string head engine switch engine switch FEATURES KNOW YOUR STRING TRIMMER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. EZ WIND™ TAP ADVANCE SYSTEM The EZ Wind™Tap Advance System allows easy line advance during trimmer operation. GRASS DEFLECTOR The trimmer includes a grass deflector that helps protect you from flying debris. TOP-MOUNTED MOTOR The top-mounted motor improves balance and is located away from the dust and debris of the cutting area. Page Page ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST Trimmer Assembly Front Handle Curved Shaft Grass Deflector – MightyLite 26CS Straight Shaft Grass Deflector – MightyLite 26SS String Head Assembly Bottle of 2-Cycle Lubricant Operator’s Manual WARNING: If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. Front handle See Figure 2. . Loosen and remove the wing nut, lock washer, washer, and bolt from the handle. . Install the handle on the drive shaft housing at the location indicated by the label on the shaft. . Adjust handle up or down, if necessary, to desired operating position. . Reinstall the bolt, washer, lock washer, and wing nut. Tighten wing nut to secure. STRING HEAD ASSEMBLY See Figures 3 - 4. . Place the string head assembly on the end of the drive shaft housing. Make sure the hex-shaped opening on the string head assembly seats completely on the drive shaft. Install the spool retainer to secure. Install the spool retainer: Turn the spool retainer clockwise for MightyLite 26CS. Turn the spool retainer counterclockwise for MightyLite 26SS. . Remove the plastic seal from the string head assembly. WING NUT FRONT HANDLE BOLT Fig. 2 WASHER Fig. 3 SPOOL RETAINER STRINGHEAD assembly DRIVE SHAFT DRIVE SHAFT SPOOL RETAINER plastic SEAL Page ASSEMBLY Fig. 5 26CS grass Deflector bolt wing nut flat washer . For the MightyLite 26CS: Slide the string into the housing eyelet and pull outward to rotate the spool into the cutting position. For the MightyLite 26SS: Slide strings into the housing eyelets and pull outward to rotate the spool into the cutting position. . Push the spool retainer down while pulling on string(s) to manually advance the string and to check for proper assembly of the string head. curved shaft...

Herunterladen

Geben Sie zwei Ziffern: