Stimmen - 5, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Black & Decker Dateigröße: 1.23 mb Dateiname: Unterrichtssprache:

C WARNING: Do not charge the battery at ambient temperatures below 36° F (2°C) or above 104°F (40°C). Recommended charging temperature: Approximately 75°F (24°• Note: The charger plug incorporates lock outs to prevent the use of incorrect chargers. The plug must be correctly oriented when inserted. • Insert the charger plug into the charger connector at the rear of the tool (fig. D) . • Plug the charger into a 120V outlet. • Charge the tool for 16 hours before first use. For catalog numbers GSL35, GSL75: • The charger indicator light will come on indicating that the tool is charging. D • When the charge is complete the light will go out. For catalog numbers GSN30,GSN32, GSN35: • The charger indicator light will come on indicating that the tool is charging. • The light will stay on as long as the charger is connected to the tool and plugged into a working outlet. 4 5 • It WILL NOT flash, or go out when the charging cycle is complete. To maximize the lifetime of the battery, it is recommended to keep the battery connected to the charger whenever the tool is not in use. When the battery is full, the power consumption of the charger is negligible. Use CAUTION: Let the tool work at its own pace. Do not overload. Switching on and off Switching on • Push and hold the lock button (2) (fig. E) to the right or to the left and then squeeze the on/off switch (1). • Release the lock-off button. Switching off • Release the on/off switch (1). WARNING: Never attempt to lock the switch in the on position. Hints for optimum use (figs. F, G, H & I) Trimming grass • In order to achieve optimum cutting results, only cut dry grass. • Hold the tool as shown in fig. F & G. Keep your other hand well away from the blade. Maintain a stable working position so that you do not slip. Do not overreach. • When cutting long grass, work in stages from the top. Take small cuts. • Keep the tool away from hard objects and delicate plants. • If the tool starts running slowly, reduce the load. • To make a closer cut, slightly tilt the tool. Trimming hedges • Slightly tilt the tool (up to 15° relative to the line of cut) so that the blade tips point slightly towards the hedge (fig. H). This will cause the blades to cut more effectively. • Start by trimming the top of the hedge. Hold the tool at the desired angle and move it steadily along the line of cut. The double-sided blade allows you to cut in either direction. • In order to obtain a very straight cut, stretch a piece of string along the length of the hedge at the desired height. Use the string as a guide line, cutting just above it. • In order to obtain flat sides, cut upwards with the growth (fig. I). Younger stems move outwards when the blade cuts downwards, causing shallow patches in the hedge. • Take care to avoid any foreign objects. Especially avoid hard objects such as metal wire and railings, as these could damage the blades. • Regularly oil the blades. Maintenance Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Your charger does not require any maintenance apart from regular cleaning. WARNING: Before performing any maintenance on the tool, switch off the tool. Unplug the charger before cleaning it. E F H I G 90556224 REV. 1 Garden Shear Manual.qxd: chainsaw booklet new 12/4/09 12:42 PM Page 5 905624 12/4/12:42 Page 6 • Regularly clean the a soft brush or dry cloth. • Regularly clean the motor any abrasive or solvent-based • After use, carefully clean the light machine oil to prevent the Storage When the tool will not be used for several battery connected to the charger. Otherwise proceed as follows: • Fully charge the battery. • Store the tool in a secure and dry location. The must always remain in the range of 41°F (5°C) • Before using the tool after prolonged storage, fully battery again. Accessories • Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance...

Herunterladen

Geben Sie zwei Ziffern: