Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Husqvarna Dateigröße: 860.68 kb Dateiname: HOUS1999_1018980-95.pdf Unterrichtssprache:

• Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged. • Check that the angle gear is filled with grease up to 3/4. Use special grease. • Clean the air filter. • Clean or replace the muffler’s spark arrest screen (only mufflers with a catalytic converter). Monthly maintenance • Clean the fuel tank. • Clean the exterior of the carburetor and the space around it. • Clean the fan and the space around it. • Check fuel hose for cracks or other damage. Change if necessary. • Change fuel filter in fuel tank. • Check clutch, clutch spring and clutch drum for wear. Change if necessary. • Check electrical wires and connections. • Change the spark plug. • Change the airfilter. • Check and clean the muffler’s spark arrest screen if necessary (only mufflers with a catalytic converter). English – 19 TECHNICAL DATA Technical data 225L/LD 227L/LD 232L Engine Cylinder capacity, cu. in/cm3 1,55/25,4 1,64/26,9 1,88/30,8 Cylinder bore, inch/mm 1,34/34 1,38/35 1,38/35 Stroke length, inch/mm 1,10/28 1,10/28 1,26/32 Recommended max. speed, rpm 11 000-11 700 11 000-11 700 11 000-11 700 Idling speed, rpm 2 700 2 700 2 700 Speed of output axle, rpm 10 000 10 000 10 000 Max. engine output, acc. to ISO 8893 0,9 kW/ 9 000 rpm 1,0 kW/ 9 000 rpm 1,1 kW/ 8 400 rpm Catalytic converter muffler Yes Yes Yes Speed-regulated ignition system Yes Yes Yes Ignition system Manufacturer/type of ignition system Walbro CD Walbro CD Walbro CD Spark plug Champion RCJ 7Y Champion RCJ 7Y Champion RCJ 7Y Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5 Fuel lubrication system Manufacturer/type of carburetor Walbro WT Walbro WT Walbro WT Fuel tank capacity, US pint/litres 1,06/0,5 1,06/0,5 1,06/0,5 Weight Weight without fuel, cutting tool and guard, Lbs/kg 12,6/5,7 (LD 13,2/6,0) 12,6/5,7 (LD 13,2/6,0) 13,7/6,2 Noise levels Equivalent noise pressure level at the user’s ear, measured according to EN 11806 and ISO 7917, dB(A), min/max: 95/99 92/97 92/100 Equivalent noise power level at the user’s ear, measured according to EN 11806 and ISO 10884, dB(A), min/max: 104/109 103/109 107/110 Vibration levels Vibration levels on the handles, measured according to EN 11806 and ISO 7916, m/s When idling, left/right handles, min: 2,7/2,0 3,0/2,8 2,5/2,3 When idling, left/right handles, max: 2,8/2,7 3,5/4,0 4,0/3,0 At max. speed, left/right handles, min: 2,6/2,8 2,6/3,5 3,8/2,8 At max. speed, left/right handles, max: 5,0/5,0 4,6/5,1 6,8/3,4 NOTE! Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values. Approved accessories Thread blade shaft M10 Plastic knifes Trimmer head Edger (LD) Hedge trimmer (LD) Type Tricut . 300 mm Trimmy H II Trimmy Fix Trimmy Hit Trimmy Hit Pro Superauto II Edger attachment . 200 mm Hedge trimmer attachment Cutting attachment guard Art No. 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 - - 20 – English TECHNICAL DATA Technical data 240L Engine Cylinder capacity, cu. in/cm3 2,21/36,3 Cylinder bore, inch/mm 1,50/38 Stroke length, inch/mm 1,26/32 Recommended max. speed, rpm 11 000-11 700 Idling speed, rpm 2 700 Speed of output axle, rpm 10 000 Max. engine output, acc. to ISO 8893 1,3 kW/ 9 000 rpm Catalytic converter muffler Yes Speed-regulated ignition system Yes Ignition system Manufacturer/type of ignition system Walbro CD Spark plug Champion RCJ 7Y Electrode gap, inch/mm 0,02/0,5 Fuel lubrication system Manufacturer/type of carburetor Walbro WT Fuel tank capacity, US pint/litres 1,06/0,5 Weight Weight without fuel, cutting tool and guard, Lbs/kg 13,9/6,3 Noise levels Equivalent noise pressure level at the user’s ear, measured according to EN 11806 and ISO 7917, dB(A), min/max: 98/101 Equivalent noise power level at the user’s ear, measured according to EN 11806 and ISO 10884, dB(A), min/max: 106/106 Vibration levels Vibration levels on the handles, measured according to EN 11806 and ISO 7916, m/s When idling, left/right handles, min: 4,0/3,8 When idling, left/right handles, max: 4,2/4,4 At max. speed, left/right handles, min: 6,4/7,4 At max. speed, left/right handles, max: 6,7/11,0 NOTE! Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values. Approved accessories Thread blade shaft M10 Plastic knifes Trimmer head Edger (LD) Hedge trimmer (LD) Type Tricut . 300 mm Trimmy H II Trimmy Fix Trimmy Hit Trimmy Hit Pro Superauto II Edger attachment . 200 mm Hedge trimmer attachment Cutting attachment guard Art No. 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 - - English – 21 FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (U.S. Environmental Protection Agency), CARB (California Air Resources Board) and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 1999 a...

Herunterladen

Geben Sie zwei Ziffern: