KENWOOD CD-РЕСИВЕР KDC-MP439 KDC-MP3039 KDC-MP339 KDC-MP239 KDC-139_ ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ Корпорация Kenwood СН01 © В64-3901-00/00 (MW) Содержание Перед использованием_3 Базовые функции 4 Общие функции Функции тюнера Функции воспроизведения дисков Основные функции 6 Регулировка параметров звучания Настройка звука Настройка акустических систем Переключениедисплея Использование тюнера 8 Установка шага настройки Использование проигрывателя му- зыкальных дисков/а

Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information service on the product. Model DPX-6020 Serial number © PRINTED IN JAPAN B64-2050-00 (K) (+) 02/ 6 5 4 3 2 1 01/12 11 10 9 8 7 6 5 Contents Contents Safety precautions..........................................................Presetting Disc ..............................................................................Handling Compact .................................................DSP features ......

• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. — 23 — 23— 23 — —— Connecting Connecting KENWOOD disc changer To connect the Disc changer, consult your Disc – + + + + + FRONT • L FRONT • R REAR • L REAR • R P.CONT ANT. CONT. Rear right output (Red) Rear left output (White) FM/AM antenna input changer manual. Wiring harness (Accessory1) TEL mute terminal Fuse (10A) Plug (page 25) White/Black Gray/Black Green/Black Purple/Black

Manual — Normal manual tuning control. Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. Band display Preset station number AUTO indicator 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. ST indicator Frequency display During reception of stereo stations the "ST" indicator is ON. — 13 — Tuner features Tu

This function is factory-set to ON. 3Zi To select a band Press the FM/AM button. Each time you press the FM button briefly, the band changes between FM1, FM2, and FM3. Press the AM button to choose AM band. —. 92 1 —, 92 / LFM FMI FM2 5BD ЙМ; To tune Press the Tuning up/down button. When the Tuning up button is pressed, up seeking is performed. When the Tuning down button is pressed,.down seeking is performed. The Stereo indicator appears on the display when stereo broadcasts are

Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual — Normal manual tuning control. Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency

About Cassette tape • If the tape is slack tighten it. • If the cassette tape label is peeling off glue it on again. • Don’t use deformed cassette tape. • Don’t place cassette tape on the dashboard etc. where the temperature is high. • Don’t use cassette tape that’s 100 minutes long or longer. — 4— General features General features 4 . SRC FMAM Q/AUD ud ATT / LOUD CLK#3#1 Turning ON the Power Release button Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 secon

Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure

Familiarity with installation and operation procedures wilJ help you obtain the best performance from your new cassette-receiver. For your records Record the serial number, found on the back of the unit in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model KRC-160 Serial number_E_ ©PRINTED IN MALAYStA B64 - 0264 - 00 (KS) (+) 94>12 11 10

(When the seek function finds a station, the "A" indicator will light up. The display will show the number of the button to which it has been assigned.) FM I When six stations have been found, the Auto memory function stops. You will hear the last station selected. USING PRESET STATIONS ► Briefly press the button of the station you want, (When you press the button, you will hear the station assigned to it.] FM s O J JL. Tuner -features 13 TUNER CALL 14 Cassette player feature CLOCK