Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
ENGLISH Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 1 2 1 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. F1 F2 F3AM (FM1) (FM2) (FM3) 2 Press and hold both buttons for more than 2 seconds. “SSM” appears, then disappears when automatic preset is over. Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No. 1 (lowest frequency) to No. 6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in. Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1 band ENGLISH 3 12 Select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Selected band, preset number and “MEMO” flash alternately for a while. 4 Repeat the above procedure to store other stations into other preset channel numbers. Notes: • A previously preset station is erased when a new station is stored in the same preset channel number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. 7 ENGLISH Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 21 1 Select the band (FM1, FM2, FM3 or AM) you want. F1 F2 F3AM (FM1) (FM2) (FM3) 2 Select the number (1 – 6) for the preset station you want. Other convenient tuner functions SCAN MO RND Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO RND (Monaural/Random) while listening to an FM stereo broadcast. The MONO indicator lights up on the display. The sound you hear becomes monaural but reception will be improved. Lights up when receiving an FM broadcast in stereo. To restore the stereo effect, press the same button again. ENGLISH ENGLISH 1 Open the control panel. 2 1. Insert a cassette into the cassette compartment. The unit turns on and tape play starts automatically. TAPE OPERATIONS Listening to a tape RPT 1 3 ENGLISH 1 Open the control panel. 2 1. Insert a cassette into the cassette compartment. The unit turns on and tape play starts automatically. TAPE OPERATIONS Listening to a tape RPT 1 3 2. Close the control panel by hand. • When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) Note on One-Touch Operation: When a cassette is already in the cassette compartment, pressing TAPE 23turns on the unit and starts tape play automatically. 3 Select the tape direction. Each time you press the button, the tape direction changes alternately – forward ( ) and reverse ( ). To play back tapes recorded with the Dolby B NR Press RPT (Dolby NR/Repeat) for more than 2 seconds to set the Dolby B NR* system. The indicator lights up, and “DOLBY B” appears on the display for several seconds. To cancel the Dolby B NR, press the same button again. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. To stop play and eject the cassette Press 0. Tape play stops, the control panel opens, then the cassette automatically ejects from the cassette compartment. If you change the source to FM, AM or CD changer, the tape play also stops (without ejecting the cassette this time). • You can also eject the cassette with the unit turned off. To fast-forward and rewind a tape Press . for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side. Press 4 for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts. To stop fast forward and rewind at any position on the tape, press TAPE 23. Tape play starts from that position on the tape. ENGLISH Finding the beginning of a tune Multi Music Scan allows you to automatically start playback f...