Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KSU15K) for connecting it to this unit. Before operating your CD automatic changer: • Refer also to the Instructions supplied with your CD changer. • If no discs are in the magazine of the CD changer or the discs are inserted upside down, “NO CD” or “NO DISC” will appear on the display. If this happens, remove the magazine and set the discs correctly. • If “RESET 1 – RESET 8” appears on the display, something is wrong with the connection between this unit and the CD changer. If this happens, check the connection, connect the connecting cord(s) firmly if necessary, then press the reset button of the CD changer. Playing CDs 1 All tracks of all discs are played back. CD-CH Select the CD automatic changer. Playback starts from the first track of the first disc. . 4 Number buttons 7 8 9 10 11 12 1 • “DISC” or “TIME” can be selected in the preferred setting mode control (see page 22). When “TIME” is selectedWhen “DISC” is selected CD-CH CD-CH Disc number Track number Elapsed playing time Note on One-Touch Operation: When you press CD-CH, the power automatically comes on. You do not have to press ATT to turn on the power. 24 To fast-forward or reverse the track Press and hold . , while playing a CD, to fast-forward the track. SSM Press and hold 4 , while playing a CD, to reverse the track. To go to the next track or the previous track Press . briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning SSM of the next track is located and played back. Press 4 briefly, while playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous track is located and played back. To go to a particular disc directly 78 910 11 12 1 2 3 4 5 6 Press the number button corresponding to the disc number to start its playback. • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second. Ex. When disc number 3 is selected Disc number CD-CH Track number ENGLISH 25 ENGLISHENGLISH Selecting CD playback modes MO/RND To play back tracks at random (Random Play) Each time you press MO/RND (mono/random) while playing a CD, CD random play mode changes as follows: RND1 RND2 Cancelled (Random1) (Random2) MO RND Mode RND Indicator Plays at random RND1 Lights All tracks of the current disc, then the tracks of the next disc, and so on. RND2 Flashes All tracks of all discs inserted in the magazine. 26 MAINTENANCE To extend the lifetime of the unit This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below. To clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: – Sound quality is reduced. – Sound level decreases. – Sound drops out. • Do not play dirty or dusty tapes. • Do not touch the highly-polished head with any metallic or magnetic tools. To keep the tape clean • Always store the tapes to their storage cases after use. • Do not store tapes in the following places: – Subject to direct sunlight – With high humidity – At extremely hot temperatures CAUTIONS: • Do not play the tapes with peeling labels; otherwise, they can damage the unit. • Tighten tapes to remove slack since loose tape may become entangled with the mechanism. • Do not leave a cassette in the cassette compartment after use, as the tape may become slack. ENGLISH 27 ENGLISH ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • A cassette tape cannot be inserted. You have tried to insert a cassette in the wrong way. Insert the cassette with the exposed tape facing right. • Cassette tapes become hot. This is not a malfunction. • Tape sound is at very low level and sound quality is degraded. The tape head is dirty. Clean it with a head cleaning tape. • Sound is sometimes interrupted. Connections are not good. Check the cords and connections. • Sound cannot be heard from the speakers. The volume control is turned to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. • Static noise while listening to the radio. The antenna is not connected firmly. Connect the antenna firmly. • “NO CD” or “NO DISC” appears on the display. No CD is in the magazine. Insert CDs into the magazine. CDs are inserted incorrectly. Insert them correctly. • “RESET 8” appears on the dis...