|
Anleitung Zusammenfassung
Switch off and withdraw the mains plug when making or changing connections. • DO consult your dealer if you are ever in doubt about the installation, operation, or safety of your equipment. • DO be careful with glass panels or doors on equipment. • DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged, in any way - switch off, withdraw the mains plug and consult your dealer, • DON'T remove any fixed cover as this may expose dangerous voltages. • DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people. • DON'T listen to headphones at high volume, as such use can permanently damage your hearing. • DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. • DON'T allow electrical equipment to be exposed to rain or moisture. Above all NEVER let anyone, especially children, push anything into holes, slots or any other openings in the case. This could result in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind. It is better to be safe than sorry! Note : If energy saving lamps (Fluorescent) are used in the same room as the unit, erratic operation may occur. e e 4 3473.qxd 27.06.2005 12:14 Page 5 ENGLISH LOCATION OF CONTROLS TOP VIEW 1. VOLUME Control 2. BASS BOOST ON/OFF SWITCH 3. FUNCTION Selector Switch (CD/TAPE/RADIO) 4. FM Rod Antenna 5. Handle 6. CD Door 7. CD door Open Lid 8. Dial pointer 9. BAND Selector 10. TUNING Control 11 Control Buttons (PAUSE/STOP-EJECT/FFW/ REW/PLAY/ RECORD) FRONT VIEW 12. FOLDER DN/M-DN Button 13. FOLDER UP/M-UP Button 14. POWER ON Indicator 15. CD PROG. Button 16. PLAY MODE Button 17. CD Track Display 18. CD PLAY/PAUSE Button 19. CD STOP Button 20. Built-in Microphone 21. FM ST. Indicator 22. CD SKIP NEXT Button 23. CD SKIP BACK Button 24. Speaker 25. Cassette Door 26. Speaker BACK VIEW 27. Battery door 28. AC Input socket 29. Stereo Headphone socket Headphone Jack Headphone Jack "PHONES" (29) for headphones with 16-32 Ohm impedance (3.5mm jack). Use corresponding adaptors (Electronics shops) if you have different plugs. The speakers are automatically switched off when the headphones are being used. CAUTION: Listening at high power for long periods of time can damage users' ears. 5 3473.qxd 27.06.2005 12:14 Page 6 ENGLISH POWER ON/OFF 1. Connect the power cable to the AC input socket (28) at the unit and then insert the power plug in the wall socket. Slide the FUNCTION selector (3) to your desired mode (CD, TAPE or RADIO with Play button pressed). 2. To turn off the power, slide the FUNCTION selector (3) to TAPE (OFF) position. BASIC OPERATION Volume Control Once the required station has been located or during tape/CD playback, adjust VOLUME control (1) to the desired level. LISTENING TO THE RADIO 1. Select the FUNCTION selector (3) to RADIO mode. 2. Select the BAND selector (9) to AM or FM or FM ST band. 3. Tune the TUNING control (10) to the desired station. 4. When finished listening, slide the FUNCTION selector (3) to TAPE (OFF) position. PLAYING COMPACT DISCS 1. Select the FUNCTION selector (3) to CD mode. 2. If there is no CD inside or disc damaged, the LCD will show "no". Loading a disc 1. Press the CD door open button (7) to open the CD door. 2. Put a disc inside and then close the CD door. The unit begins to read the disc. After that, the disc is playing automatically. Note: Ensure the disc is pushed fully and locked in place. This unit is CD-R / -RW compatible. To play the disc In CD stop mode, press PLAY/PAUSE button (18) to play the CD. To pause the playing Press PLAY/PAUSE button during the disc is playing, the playing time will flash. Press it again to resume playing. To stop the disc playing Press the STOP button (19). Skip and Search Function Press the SKIP NEXT or BACK button (22/23) momentarily In play mode In stop mode Press once Back to the begining of the current track Press twice Previous track Press once Previous track >►1 Next track Next track Press and hold the SKIP button during playback: m: FAST BACKWARD >M : FAST FORWARD NOTE : During search mode low level audio will be heard to assist in locating the correct point in the track. PROGRAMMED PLAYBACK The CD player enables you to program up to 20 tracks in a sequence of your choice. First select CD stop mode. 1. Press the PROG. button (15) one time. ("PROGRAM" flashes) 2. Press the SKIP NEXT or BBACK button (23) to select the desired track to be programmed. 3. Press the PROG. button (15) again, then the selected track, e.g., track 4 is sto...
Dieses Handbuch ist für folgende Modelle:Kompakt-Stereoanlagen - VT-3470 (1.34 mb)