Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The CPS mode is activated and the tape counter displays "1." Pressing STOP and MEMO IN in other transport modes than stop, too, activates the CPS mode, the transport going into stop. 13 2. Specify how many selections from the current tape location is the desired selection by pressing MEMO IN as many times as necessary. Each time you press MEMO IN the number in the tape counter window will increment. You can enter up to 15. You can hold MEMO IN to scroll up the numbers. w> 3. Depending on whether your selection is ahead or behind the current tape location, press F.FWD or REW. 4. Each time a blank space of about 4 seconds is encountered, the tape counter display will decrement, and at the end of search operation, the tape will automatically start playing. ■ Before pressing F.FWD or REW in step 3 if any of the following is pressed, the function pressed is activated and the CPS mode is disabled : o Transport controls except F.FWD and REW o RTZ o LOC 1/2 o REPEAT ■ If you press F.FWD or REW after once search starts, the function pressed is activated and the CPS mode is disabled. In continuous reverse mode ( CZD ), you can skip to a selection on either tape side. In once-through reverse mode ( ZZD ), you can skip from the tape side facing you to a selection on the reverse tape side, but you cannot skip from the reverse tape side to a selection on the tape side facing you ; the tape will stop when either end of the reverse tape side is reached. High speed cueing functions (#4 and 5, page 6): Depending on some conditions such as type of tape in use, environmental temperature and humidity, etc. reverse cueing may not possibly start, or may start but not smoothly, if the current tape location is close to the beginning of the tape. Similarly, the forward cueing may not possibly start as expected if attempted near the end of the tape. 14 Bias and Recording Level Calibration (122 MKIII only) Tapes differ considerably in the bias required to record on them and in their sensitivity. The 122 MKIII allows fine adjustment of bias to exactly match the tape being used ; also the reference recording level can be precisely adjusted to compensate for difference in sensitivity among tapes. ■ Before starting adjustment, clean the heads, tape guides, rollers, etc. and demagnetize the heads and all metal parts in the tape path. ■ In you intend to make adjustment while monitoring through speakers, turn down their volume to avoid damage to them. ■ Have at hand a crisscross screwdriver which fits in with the BIAS/LEVEL trimmers. \ I ✓ —O^CORO
Kompakt-Stereoanlagen - 122MKII (994.89 kb)
Kompakt-Stereoanlagen - 112MKII (994.89 kb)
Kompakt-Stereoanlagen - 122RMKII (994.89 kb)