Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Optimus Dateigröße: 929.23 kb Dateiname: Unterrichtssprache:

3. Replace the cover. 7 14-1246.fm Page 8 Thursday, January 13, 2000 1:04 PM The SCP-105’s battery indicator shows the amount of battery power remaining. The indicator consists of three sections — the more sections that appear, the higher the battery power. High Medium Low When appears or the SCP-105 stops operating properly, replace or recharge the batteries. Warning: Dispose of old batteries promptly and properly. Do not burn or bury them. Caution: If you do not plan to use the SCP-105 with batteries for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. 8 14-1246.fm Page 9 Thursday, January 13, 2000 1:04 PM Important: Your SCP-105 can use nickel- cadmium rechargeable batteries. At the end of a nickel-cadmium battery's useful life, it must be recycled or disposed of properly. Contact your local, county, or state hazardous waste management authorities for information on recycling or disposal programs in your area or call 1-800-843-7422. Some options that might be available are: municipal curbside collection, drop-off boxes at retailers such as your local RadioShack store, recycling collection centers, and mail-back programs. 1-800-843-7422 Using AC Power You can power the SCP-105 using a 3V, 200-mA AC adapter and a size A Adaptaplug® (neither supplied). Both are available at your local RadioShack store. Cautions: ! You must use a Class 2 power source that supplies regulated 3V DC and delivers at least 200 mA. Its center tip must be set to positive and its plug must fit the SCP-105's DC 3V jack. Using an adapter that does not meet these specifications could damage the SCP-105 or the adapter. • Always connect the AC adapter to the SCP-105 before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the SCP-105. 9 14-1246.fm Page 10 Thursday, January 13, 2000 1:04 PM Follow these steps to connect the SCP-105 to AC power. DC 3V 1. Set the adapter’s voltage switch to 3V. 2. Insert the Adaptaplug into the adapter’s cord so it reads + TIP. 3. Insert the plug into the SCP-105’s DC 3V jack. 4. Plug the adapter into a standard AC outlet. Using Vehicle Battery Power You can power the SCP-105 from a vehicle’s 12V power source (such as cigarette-lighter socket) using a 3V, 200-mA DC adapter and a size A Adaptaplug® (neither supplied). Both are available at your local RadioShack store. Cautions: ! You must use a power source that supplies regulated 3V DC and delivers at least 200 mA. Its center tip must be set to positive and its plug must fit the SCP-105's DC3V jack. Using an adapter that does not meet these specifications could damage the SCP-105 or the adapter. 10 14-1246.fm Page 11 Thursday, January 13, 2000 1:04 PM • Always connect the DC adapter to the SCP-105 before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the SCP-105. Follow these steps to power the SCP-105 from your vehicle’s battery. DC 3V 1. Set the adapter’s voltage switch to 3V. 2. Insert the Adaptaplug into the adapter’s cord, so it reads + TIP. 3. Insert the plug into the SCP-105’s DC 3V jack. 4. Plug the other end of the adapter into the vehicle’s cigarette-lighter socket. SETTING THE CLOCK You can set your SCP-105 so it displays as many as 5 separate times. One clock displays the current time, three clocks display a time that is offset by an amount you set from the current time, and one clock displays any time you set. 11 14-1246.fm Page 12 Thursday, January 13, 2000 1:04 PM Note: You cannot set the time while listening to a tape or playing the radio. Follow these steps to set the clock. 1. Repeatedly press RADIO ON/OFF BAND (if necessary) to display the clock. 2. Hold down the desired clock’s button (such as 1 for Clock 1) for about 2 seconds. 3. Hold down TIME SET (+5) for about 2 seconds until : (the colon) stops flashing. 12 14-1246.fm Page 13 Thursday, January 13, 2000 1:04 PM 4. When you set Clock 1 or 5, repeatedly press HOUR until the desired hour and AMor PM appear. Then, repeatedly press MINUTE until the desired minute and AM or PM appear. (Hold down HOUR or MINUTE to rapidly advance the time digits). When you set Clock 2, 3, or 4, repeatedly press MINUTE. The minute digits increase by 30 minutes each time you press MINUTE. 5. Press TIME SET. : (the colon) flashes and the clock starts. To select a clock, hold down the desired clock number (1 – 5) button for about 2 seconds. The clock you selected appears. 13 14-1246.fm Page 14 Thursday, January 13, 2000 1:04 PM CONNECTING HEADPHONES OR SPEAKERS To connect your headphones or amplified speaker system (not supplied) to the SCP-105, insert the headphones’ or amplified speaker system’s 1/8-inch (3.5-mm) mini-plug into the SCP-105’s jack. Listening Safely To protect your hearing, follow these guidelines when you use headphones. • Set the volume to the lowest setting before you begin listening. After you be...

Herunterladen

Geben Sie zwei Ziffern: