Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 188.11 kb Dateiname: B64-1193-00.pdf Unterrichtssprache:

They can deform the cassette. • Avoid using extremely long cassette tapes, such as 100-minute-tapes. Such tapes are very thin, and can tangle easily around pinch rollers or other parts inside the unit, causing unit failure. • Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction. u d SRC/ PWR OFF Basic operations AUTO AME CLK LOUD ATT LOUD MONO ATT indicator LOUD indicator Volume — 4— Buttons Tuner features Cassette player FM/ AM MONO SRC 4 .. 0 REW FF AUTO AME CLK MONO LOUD AUTO AME CLK MONO LOUD # 1- 6 AUTO/ AME T. C SRC LO.S indicator Preset Station Number Frequency Tape indicator MONO indicator Band display T.C indicator ST indicater AUTO indicater — 5— English Buttons Other features SRC/ AUD FM 4 . PWR OFF AUTO AME CLK CLK AM # 3 # 1 MONO LO u d Basic operations (See page 4) Power Turning on the power: Press the SRC button. NOTE Turn the power on before carrying Turning off the power: Hold down the PWR OFF button Selecting the standby mode: Press the SRC button repeatedly to select . When "OFF" is displayed, the standby mode The standby mode turns all functions off although unit’s power on. Use this mode when you want display illuminated but do not want to listen to anything. Switching Modes Switching Modes: Each time you press the SRC button, the mode switches as follows: t Tuner mode t Tape mode t Standby mode NOTE The mode switches to the next mode from any mode which cannot be used. Clock display Volume Increasing Volume: Press the ubutton to turn up the volume. Decreasing Volume: Press the dbutton to turn down the volume. — 6— Basic operations (See page 4(See page 4) Tuner features (See page 5) Attenuator Tuning This function allows Turning Attenuator On/ Press the ATT button to switch When the attenuator is on, When the attenuator is off, the level. NOTE Turning down the volume all the way turns function. Loudness This function amplifies low and high tones when is turned down. The LOUD indicator lights up, when the loudness function on. Turning Loudness On/Off: Press the LOUD button to switch the loudness on and off. You can choose from seek, and manual. When the AUTO indicator selected, and when it is Local seek refers to auto seek with poor reception. When turns on. 1 Press the SRC button repeatedly until tuner "TUnE" is displayed when the tuner mode 2 Press either the FM or AM button to select the Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands. 3 Each time you press the AUTO button, the mode switches follows: t AUTO indicator LO.S indicator Auto seek m . t Local seek . m t Manual . 5 4 • Auto Seek Tuning Press the . button to seek increasing frequencies. Press the 4button to seek decreasing frequencies. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4button to decrease the frequency by one step. NOTE The ST indicator lights up when stereo broadcasts are being received. — 7— Tuner features (See page 5) (See page 5) Monaural Reception Auto Memory English Turn monaural reception Turning Monaural Reception Hold down the MONO button monaural reception on and off. The MONO indicator lights up Station Preset Memory Store the frequency of the station currently You can then recall that station with a single 1 Select the band/ station that you want to have stored. 2 Hold down the button (#1-6) that you want to use for for two seconds or more. The button number blinks once in the display to indicate that the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. You can automatically the band currently being the touch of a button when you are travelling are available. Up to 6 frequencies can be 1 Select the band for auto memory 2 Hold down the AME button for two auto memory entry. The numbers of the preset station buttons When all the stations in a certain band are stored memory, the auto memory entry stops. The tuner the last station received. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. NOTE When the local seek function is turned whilst auto memory entry takes place, the auto memory entry function is cancelled. NOTE You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands. — 8— Cassette (See page 5) (See page 5) Playing Cassette Tuner Call Function Loading and Playing Load a cassette with The tape starts playing With Side A facing up, the 3indicator lights up when Side playing, and 2when Side B is playing. The 23indicator lights up whilst play is Playing Cassettes Already Loaded: Press the SRC button repeatedly until obtained. "TAPE" is displayed when the selected. Listening to the other side: Press the FF button and REW button at the same ...

Herunterladen

Geben Sie zwei Ziffern: