Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 278.05 kb Dateiname: Unterrichtssprache:

*Programme Type PTY (PTY mode entered) ­ NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. • Some tuner functions will not be displayed unless you are currently listening to the tuner. • Functions marked with an asterisk (*) cannot be used during AM reception. • The News function turns on when the setting is made for the news interruption interval. The "00M" display indicates the setting selected for the news interruption timeout interval. — 9— English Tuner features (See page 5) Selecting Tuning Local Seek Select which tuning the default. When the AUTO indicator When the indicator is off, 1 Hold down the MENU button "MENU" is displayed and the menu 2 Press the . button repeatedly until the tuning function appears in the display. Press the 4button to search in the other direction. The function setting is indicated by "AUTO" display, indicating auto seek or manual tuning, 3 Switching settings Press either the AM button or FM button to switch mode. The display and setting will change. 4 Press the MENU button to end the menu mode. Tuning 1 Press the SRC button repeatedly until tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands. 3 • Auto Seek Tuning Press the . button to seek increasing frequencies. Press the 4button to seek decreasing frequencies. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4button to decrease the frequency by one step. NOTE The ST indicator lights up when stereo broadcasts are being received. With the local seek stations with relatively Turning Local Seek Function 1 Hold down the MENU button "MENU" is displayed and the menu 2 Press the . button repeatedly until the local seek appears in the display. Press the 4button to search in the other direction. The function setting is indicated by "LO.S the display, indicating that the local seek function respectively. 3 Switching settings Press either the AM button or FM button. The display and setting will change. When local seek function is on, the LO.S indicator is turned 4 Press the MENU button to end the menu mode. Monaural Reception When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the . button repeatedly until the monaural reception function appears in the display. Press the 4button to search in the other direction. The function setting is indicated by "MONO ON" or "MONO OFF" in the display, indicating that monaural reception is on or off, respectively. 3 Switching settings Press either the AM button or FM button. The display and setting will change. When monaural reception is on, the MONO indicator turns on. 4 Press the MENU button to end the menu mode. — 10 — Station Preset Store the frequency You can then recall 1 Select the band/ station that 2 Hold down the button (#1-6) for two seconds or more. The button number blinks once in data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the number of the recalled station is displayed. NOTE You can store 6 stations in each of the FM1, FM2, (MW and LW) bands. Auto Memory Entry You can automatically store all the receivable frequencies band currently being listened to, and then recall them with touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. 1 Select the band for auto memory entry. 2 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 3 Press the . button repeatedly until "A-MEMORY" appears in the display. Press the 4button to search in the other direction. 4 Hold down either the AM button or FM button for two seconds or more to start auto memory function. The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. Recalling a Preset Press the preset number of the recalled NOTE • When the AF functio...

Herunterladen

Geben Sie zwei Ziffern: