Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Fotos und technische Daten Pioneer KEH-P4025 |
Anleitung Zusammenfassung
4 STEREO (.) indicator Shows that the frequency selected is being broadcast in stereo. 1 Press SOURCE to select the tuner. 2Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered. 3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold 2 or 3 for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. • You can cancel seek tuning by pressing either 2 or 3 with a quick press. • If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note • When the frequency selected is being broadcast in stereo the STEREO (.) indicator will light. 7 En Tuner Storing and recalling broadcast frequencies If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequencies for later recall with the touch of a button. When you find a frequency that you want to store in memory press a PRESET TUNING button and hold until the preset number stops flashing. The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same PRESET TUNING button the radio station frequency is recalled from memory. Notes • Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. • You can also use 5 and . to recall radio station frequencies assigned to PRESET TUNING buttons. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press LOCAL to turn local seek tuning on. Local seek sensitivity (LOC) appears in the display. 2 When you want to return to normal seek tuning, press LOCAL to turn local seek tuning off. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under PRESET TUNING buttons 1–6 and once stored there you can tune in to those frequencies with the touch of a button. Press and hold BSM for about two seconds to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESET TUNING buttons in order of their signal strength. When finished, BSM stops flashing. • To cancel the storage process, press BSM. Note • Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using PRESET TUNING. English En 8 Cassette Player Playing a tape 12 1 TAPE DIRECTION indicator Shows the direction of the tape transport. 2 PLAY TIME indicator Shows the elapsed playing time of the current side of the tape. 1 Press OPEN to open the front panel. Cassette loading slot appears. 2 Insert a cassette tape into the cassette loading slot. Playback will automatically start. Cassette loading slot TAPE EJECT button • You can eject a cassette tape by pressing TAPE EJECT. 3 Close the front panel. 4Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered. 5 To perform fast forward or rewind, press 2 or 3. FF or REW appears in the display. • To cancel fast forward or rewind and return to playback, press BAND. • You can cancel fast forward or rewind by pressing 2 or 3 in the same direction twice. 6 To perform forward or rewind music search, press 2 or 3 twice. F-MS (forward music search) or R-MS (rewind music search) appears in the display. The cassette player will fast forward or rewind to the next or previous blank spot on the tape and begin to play. • To cancel music search and return to playback, press BAND. • You can cancel music search by pressing 2 or 3 in the same direction again. 7 To change the direction of the tape transport, press BAND. Notes • Do not insert anything other than a cassette tape into the cassette loading slot. • PLAY TIME indicator starts from 00’00” in the following cases: — When a tape is inserted — When the tape direction is changed — When you rewind the tape to the beginning • PLAY TIME indicator is halted when fast forward, rewind or music search is operating. • After a cassette tape has been inserted, press SOURCE to select the Cassette player. 9 En Cassette Player Repeating play Repeat play lets you hear the same track over again. 1 Press REPEAT/RANDOM to turn repeat play on. RPT appears in the display. The track presently playing will play and then repeat. 2 Press REPEAT/RANDOM to turn repeat play off. The track presently playing will continue to play and then play the next track. Skipping blank tape sections Blank skip automatically fast forwards to the next song if there is a long period of silence (12 seconds or longe...