Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Philips Dateigröße: 424.77 kb Dateiname: 5f9803d5-6331-4082-99b3-1b10f037fb00.pdf Unterrichtssprache:

Turn the vehicle’s ignition key to the “on” or “acc” position to provide power to the radio. 2. Rotate knob (1) clockwise to turn the radio on. Adjust the volume knob (1) to a low listening level. 3. Use the band button (4) to select the AM or FM radio band. The FM band has 3 banks (FM1, 2, and 3). The AM band has 2 banks (AM 1 and AM 2) 4. Use the tuning button (5) to select a desired radio station. Press the next available strong station and stop for 5 seconds. After 5 seconds has passed, the tuner will search up to the next strongest station and stop. If you find a station to your liking, simply press and release the scan button once again to stop the scan operation. 6. Adjust the treble, bass, fader, balance and volume controls as needed using the information “Audio adjustments” section of this manual. Display Priority Note: The priority of the display area (9) is “ < “(up) button to tune to for the clock. 5 seconds after the last higher radios stations.Use the < “ “ (down) button to tune to lower radio stations. Pressing and releasing the tuning control buttons (5) will cause the tuner to move up or down two decimal increments. Pressing and holding the up or down tuning buttons (5) will cause the tuner to count up or down at high speed. 5. If you are traveling in an area where you are not familiar with the local radio stations, Press and release the scan button (6). This will activate the auto tuning system and the tuner will scan up to the tuning control command, the display will change and display the clock. To recall the radio frequency, press and release the “R.Freq” button (7). The display will change to show the radio frequency then will revert back to the clock after 5 seconds. Using the Radio Listening to the Weatherband Radio 1. At any time when the AM/FM radio or tape is playing, you can press the “Weather” button (8). The automatic weatherband seek tuning will begin to find the strongest broadcast frequency in the area you are traveling in . When the weatherband radio is activated, “WB” will appear in the display area (Figure 4). Once the tuner has locked on to a station, the weatherband radio will operate. 2. To turn the weatherband radio off, press the “weather” button (8) once more and the unit will return to the signal source (AM/FM or Tape) you were previously listening to. 3. 7 weather stations are available. If you would like to scroll though the stations, press the weather button (8) to activate the weatherband and then press the “ < “ or “ < “ tun ing button (5) to scroll up or down the 7 stations. Note: All 7 stations may not be available in the area you are traveling in. Cassette Operation Some Notes About Cassette Tapes * It is not recommended to use any tape with a length longer than 90 minutes playing time. Longer tapes create excessive load on the tape motor and mechanism causing premature wear and failures. Longer tapes have a tendency to tangle and jam automotive tape mechanisms. * Cassette tape housings that are warped or that have loose indicator labels should not be used. Doing so will result in the tape becoming jammed in the mechanism. * Storing cassette tapes in areas directly exposed to sunlight or high temperatures will cause the cassette cases to warp rendering them unusable. Store cassette tapes in a case designed specifically for that purpose. This will prevent warpage and foreign material contamination. Periodic Tape Mechanism Cleaning While the tape is playing, small deposits of foreign material attach themselves to the tape head, pinch rollers and capstans of the tape player mechanism. Failure to periodically clean the foreign material off will result in poor sound quality and a tape mechanism ...

Herunterladen

Geben Sie zwei Ziffern: