Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Be sure to match L (left) and R (right) terminals of the components. To make correct connections, use cords with white plugs for left channel connections, and cords with red plugs for right channel connections. RD-835 AMPLIFIER —OUT- IN — p Û I В OR RELEIVER Й О W — IN -OUT— AUTOMATIC SHUTOFF SYSTEM When either end of tape is reached in play, record, fast-forward, or rewind mode, the motor and transport mechanism will automatically shut off, disengaging the present mode. Note, however, that it is still necessary to turn off the entire unit by pressing the power switch to off. CASSETTE TAPES • To prevent possible trouble with the transport mechanism, use of large size cassette tapes, such as C-120, is not recommended. • Handle cassette tapes with care. Keep them away from heat, circulating dust, or a magnetic field (e.g. on the TV set). • Each cassette tape has safety tabs on its back edge to prevent accidental re-recording. The tabs are provided for both sides of cassette tape. You cannot record on the side whose tab has been removed. The tab can be removed with a screwdriver, etc. If you wish to record on the side with no tab, place a piece of adhesive tape, etc over the opening where the tab has been, then you can record. • A loosened tape may cause trouble in playback or recording. Check the tape before loading it into the deck. If it is slack, insert a pencil or the like into either of cassette’s hubs, and rotate it carefully until the slack is taken up. SWITCH AND CONTROLS (1) Power Button This button turns on the unit. When it is turned on, the cassette compartment is illuminated. Press the button a second time to turn off the power. (2) Cassette Door Cassette tape is loaded into the cassette door. Press the STOP/EJECT button to open the door. (3) Tape Counter and Reset Button The three-digit tape counter indicates the amount of tape travel. Push the reset button to set the counter to "000”. This counter is convenient in finding the beginning of a specific section of the tape or checking the amount of the remaining tape on the cassette. (4) Peak Level Indicator Give instantaneous display of recording or playback level for both left and right channels respectively. Each bank of 5 LEDs directly shows levels from -lOdBto +6dB. 2 © □ © ©□ ROTEL. STEREO CASSETTE TAPE DECK RD835 STOP REC PLAY new r rwo EJECT PAUSE © 100013 CCXlNTf n flFSFT ©