Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Use of non- Smith Corona (brand or manufactured) supplies or accessories will not (except as noted below) void this warranty. THE WARRANTY WILL BE VOID if the typewriter is damaged or rendered wholly or partially inoperable as a result of using a non-Smith Corona supply or accessory item(s). Right Ribbon System ® Feature Your Smith Corona typewriter uses ribbon and correcting cassettes with the Right Ribbon System feature. Smith Corona’s patented Right Ribbon System feature assures that the right combination of ribbon and correcting cassette is inserted in the typewriter. Assures use of Correctable film with Lift-Off correction. Assures use of Multi-Strike film with Cover-Up correction. For example: Correctable film ribbon with Cover-Up correcting cassette. If a mismatched set is inserted, the ribbon cassette cannot be fully or properly inserted into your typewriter. The exclusive Right Ribbon System feature using the patented Smith Corona Ribbon and Correcting Cassettes is designed to make changing ribbons and correcting tapes quick, easy, and error-free. Because of Smith Corona’s patented correcting tape feed mechanism, the lift-off correcting cassette has approximately two times the yield of spooled tapes found in other machines. Replace the ribbon cassette when a different colored portion begins to unwind from the Cassette. Be sure to use the Right Ribbon System combination. Correctable Film with Lift-Off Correction When using Correctable Film ribbon cassettes, use Smith Corona Lift-Off correcting cassettes. Lift-Off tape removes your errors quickly and cleanly. It will not remove the print of a Multi-Strike ribbon. Lift-Off correcting cassettes have a yellow cut-out on the lower right. See “Supplies and Accessories.” Multi-Strike Film with Cover-Up Correction When using Multi-Strike Film ribbon cassettes, use Smith Corona Cover- Up correcting cassettes. Cover-Up tape covers your errors neatly and quickly. Cover-Up correcting cassettes have a pink cut-out on the lower right. See “Supplies and Accessories.” H SERIES H Correctable Right RightRight Ribbon RibbonRibbon System SystemSystem® H Smith Corona Corporation Care and Maintenance — 6-1 Removing the Ribbon Cassette Replace the ribbon cassette when a different colored portion begins to unwind from it. 1. Tilt the sound shield toward you. 2. Grasp cassette on both sides. 3. Lift cassette STRAIGHT up and out. Inserting the Ribbon Cassette 1. Turn the gear wheel on the bottom of the cassette in the direction indicated to tightly wind the cassette. 2. Turn the cassette over with the name face up and the ribbon toward the print hammer. 3. Set the cassette in the carrier while guiding the ribbon between the printwheel and the typing guide. Press down. The ribbon snaps into place. 4. Return the sound shield to its original position. Be sure it snaps into place. NOTE: Stencils designed specifically for daisywheel typewriters perform best when the print ribbon is inserted. To determine which brand best fits your individual requirements, check with your office supplies retailer. Correcting Cassette Replace the correcting cassette when a different colored portion unwinds from the right spool. Be sure to use the Right Ribbon System combination. Removing the Correcting Cassette 1. Tilt the sound shield toward you, and remove the print ribbon cassette. 2. Grasp the correcting cassette on both sides as shown. Lift it up and out. 6-2 — Care and Maintenance Smith Corona Corporation Inserting a New Correcting Cassette 1. Turn the gear wheel on the bottom of the correcting cassette in the direction indicated by arrows to wind tightly. 2. Hold the correcting cassette (using both hands as shown) with the Smith Corona name facing up. 3. Guide the correcting tape between the printwheel and the typing guide and position the left gear wheel on the left mount and the right gear wheel on the right mount. 4. Snap the correcting cassette securely in place. IMPORTANT: After the cassette is mounted, tighten the slack in the tape by moving the red plastic lever toward the platen. The lever is located under the left side of the cassette towards the platen. Repeat two to three times. 5. Replace the ribbon cassette. Be sure the printwheel and the print hammer are secure. 6. Return the sound shield to its original position. Be sure it is closed securely. Smith Corona Corporation Care and Maintenance — 6-3 Printwheels Removing the Printwheel 1. Tilt the sound shield toward you. 2. Remove the ribbon and correcting cassettes. 3. Locate the print hammer release lever (left of the print hammer). Pull the lever forward until the print hammer mechanism springs away from the printwheel. 4. Lift the printwheel out. Inserting a Printwheel 1. Drop the printwheel between the print hammer and the typing guide with the type style name facing you. 2. Push the print hammer release lever back until the print hammer mechanism snaps into place. 3. Replace the ribbon and correcting cassettes. 4. Return the ...