Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
PRECAUTIONS ................................. 2 2. FEATURES ........................................ 2 3. CONTROLS ....................................... 3 4. BUTTON TERMINOLOGY ................. 3 5. CASSETTE PRECAUTIONS AND CARE ................................................. 3 6. OPERATION ...................................... 4 7. WIRED REMOTE CONTROL UNIT OPERATIONS.................................... 6 8. TROUBLESHOOTING ....................... 7 9. SPECIFICATIONS ............................. 7 Simple Guide .................................... 9 1.PRECAUTIONS 1.PRECAUTIONS This equipment has been tested and found to comply with Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE CASSETTE PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. AM 530-1710kHz/FM 87.9-107.9MHz 12V GROUND MODEL THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI- TIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER- ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDE- SERIAL No. Clarion Co.,Ltd. MADE IN CHINA Bottom view of source unit INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. 2.FEATURES Tuner Electronic Quartz-Locked PLL Tuning AM/FM Bands–1 AM, 3 FM 18 FM/6 AM Touchbutton Memory Seek Up/Down Tuning Preset Station Scan (PS) Automatic Station Store (AS) ® FM Reception System Switchable Frequency Spacing Tape Auto Reverse Locking FF/REW Hard Permalloy Dual Gutter Head Audio Electronic Audio Controls (Volume/Bass/Treble/Balance/ Fader) 4-Way Balance Controls 140 W (35 W . 4) Maximum Power Output General Night Illumination Digital Quartz Clock Full Information LCD Display Monitor Mode Water Resistance Escutcheon Wire Remote Control Capability XMA2 3.CONTROLS Source Unit 3.CONTROLS Source Unit 4.BUTTON TERMINOLOGY 1 VOL (Volume) up and Down Button 8 FF (D) Button 2 Power Button 9 Hook FUNC (Function) Button 0 Door 3 Eject (Q) Button ! SRCH (Search) Left and Right (a and d) Button 4 Display Buttons @ A-M (Audio Mode) Button 5 Preset Buttons (1 to 6) # BAND Button 6 Rew (A) Button $ PS/AS (Preset Scan/Auto Store) Button 7 PROG (Program) Button 5.CASSETTE PRECAUTIONS AND CARE 1. Tape slack can lead to operating difficulties. Remove tape slack before inserting a cassette, particularly when using C-90 or prerecorded cassettes. 2. Use C-30 to C-90 cassettes. Avoid using C-120 or longer cassettes (The very thin tape may stretch or break). 3. Clean the head periodically with a good commercial head cleaner. Avoid touching the head with magnetic or hard objects. 4. Do not oil the cassette mechanism. 5. Always remove the cassette from the mechanism when not in use. Exposure to direct sunlight, extreme temperatures or high humidity may damage cassettes. XMA2 6.WIRED REMOTE CONTROL UNIT OPERATIONS 6.WIRED REMOTE CONTROL UNIT OPERATIONS XMA2 following operations are enabled by remote control with the Wired Remote Control Unit M101RC (sold separately). WIRED REMOTE CONTROL UNIT 1 PWR (Power) Button FUNC (Function) Button 2 VOLUME Up (w) / Down (z) Buttons 3 BAND Button [ ] 4 Play/Pause (s) Button [ ], MUTE Button [ ] 5 SEARCH Up( ) / Down ( ) Buttons [ ] : In Radio Mode [ ] : In Tape Mode PWR / FUNC Button 1 Turning on and off the power Press the PWR button 1 to turn the power on and press and hold it for 1 second or longer to turn the power off. Changing the operation mode Each time the FUNC button 1 is pressed, the mode switches in the following order: Radio Tape Note: • In tape mode, if no cassette tape is loaded in XMA2, “CASS” flashes on the display and the radio mode is selected. VOLUME Up (w) / Down ( z) Buttons 2 Adjusting the volume Press the VOLUME Up button 2 to increase the volume and press the VOLUME Down button 2 to decrease the volume. BAND Button 3 Note: • In tape mode, the BAND Button on the remote controller is inoperative. Changing the band (in the Radio mode) Each time the BAND button 3 is pressed, the band switches in the following order: FM1 . FM2 . FM3 . AM . FM1..... Play/Pause ( s) / MUTE Button 4 Pause (in Tape mode) Press the Play/Pause ...