Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Radio Shack, modell 14-1132

Hersteller: Radio Shack
Dateigröße: 423.41 kb
Dateiname: 1401132_PM_EN.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Your RadioShack Voice-Activated Cassette Recorder provides time-tested recording convenience in an affordable package. The recorder’s voice-activation feature lets you record only when there is sound, providing hands-free operation while recording. The built-in microphone is sensitive enough for the boardroom, a seminar, or a lecture hall. And your recorder is small enough to fit in your briefcase or purse, so it can go wherever you go. Tape Counter — button. having to use an One-Touch Recording — lets you start Cue/Review — lets you listen to find a particular section and stop there. Tape Direction Control— remaining in the batteries. lets you change the tape’s direction at any time without having to eject the tape and turn it over. Voice Zoom — lets you record voice sounds clearly, reducing other noises in the room. Three Power Sources — let you power your cassette recorder from internal batteries (not supplied), standard AC power (with an optional AC adapter), or your vehicle’s battery (with an optional DC adapter). Auto Reverse — you can set the recorder so it automatically changes the tape direction at the end of a tape side, letting you continuously play or record on both sides of the tape. Built-in Microphone — lets you make quality recordings without external microphone. External Microphone Jack helps you quickly find a specific section on the cassette. It resets with the touch of a Earphone Jack recording with the press of a button. Battery Check Indicators — recordings at high speed to help you show you the amount of power Two-Speed Recording — lets you record at normal or extended speed to maximize your recording time. Microphone Sensitivity — lets you select low or high microphone sensitivity for recording specific sounds, like a one-on-one interview, or for recording broader sounds, as in a lecture hall. Voice Activation — lets you select hands-free operation, which saves tape. Playback Speed Control— lets you adjust the playback speed of your tape. Automatic Level Control — automatically sets the correct recording level. Automatic Shutoff — automatically turns off the recorder at the end of the reverse side of the tape while playing or recording. "+/2146#06"# © 2002 RadioShack Corporation. If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon All Rights Reserved. for pertinent information. RadioShack, RadioShack.com, and Adaptaplug are trademarks used by RadioShack Corporation. o RRRRy— Warning — Important oe ±±±± — Note .— Caution OE °°°° — Hint 2 R#9#40+0)#R# 24'2#4#6+10 Dispose of old batteries promptly and properly. Do not burn or bury them. ."%#76+10". • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the recorder with batteries for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. You must use a Class 2 power source that supplies 3V DC and delivers at least 400 mA. Its center tip must be set to positive and its plug must fit the recorder's DC 3V jack. Using an adapter that does not meet these specifications could damage the recorder or the adapter. • Always connect the AC or DC adapter to the recorder before you connect it to AC power or the power source. When you finish, disconnect the adapter from AC power or the power source before you disconnect it from the recorder. ! ±"016'"±" Connecting Power Connecting an AC or DC adapter automatically disconnects internal batteries. Connecting an Earphone/ External Microphone/ Wrist Strap • You can also use an earphone during recording to listen to what the recorder is picking up through the internal or an external microphone. (See “Operation” on Page 3) • Connecting an external microphone automatically disconnects the built-in microphone. • Your local RadioShack store carries a wide selection of earphones and microphones. #"+/2146#06"# The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alter-native to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1-800-843-7422) for information on Ni-Cd battery recycling and disposal bans/ restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources. You can power your recorder using internal batteries (not supplied), AC power (with an optional 3V, 400 mA AC adapter), or vehicle battery power (with an optional 3V, 400 mA DC adapter). %QPPGEVKPI...