Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sherwood Dateigröße: 349.66 kb Dateiname: DS801.pdf Unterrichtssprache:

AUTO TAPE SELECTOR The type of tape loaded is detected automatically by the auto tape selector and recording bias and equalization are set automatically according to the characteristic of that tape such as normal or chrome(CrO2) tape. 8 9 ENGLISH Operations • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE In case of the tape recorded with Dolby B NR system, select the Dolby B NR 3 mode. Select the desired reverse mode. 4 • Each time the POWER(ON/STANDBY) button is pressed, this unit is turned on or off. • Each time this button is pressed, the Dolby B NR mode changes as follows: DOLBY B NR(“B” light up) OFF • On the commercial tapes, if Dolby NR or “ ” appears, the tapes are recorded with the Dolby B NR. • Each time this button is pressed, the reverse mode is selected as follows: Start playback. 5 Turn the power on. 1 ON/STANDBY SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 SYSTEM REMOTE CONTROL UNIT (only for RX-801R) DISPLAY REV.MODE SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 SYSTEM REMOTE CONTROL UNIT (only for RX-801R) DISPLAY DOLBY SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM EON RDS CD SYNC. REV.MODE REMOTE CONTROL UNIT RM-404 DISPLAY TAPE or Back side Front side SYSTEM REMOTE CONTROL UNIT (only for RX-801R) : Playback of a single side. : Repeat playback of both sides. ( Front side Back side ) : Playback of both sides. (Front side Back side) Load a tape. 2 • According to the type of the tape loaded, the corresponding type(normal, chrome) is detected by the auto tape selector. Note: Do not open or close the tape tray by force. Doing so may damage it. OPEN/CLOSE • Each time “TAPE ” button pressed, the corresponding side is played back. • At the end of the tape, according to the reverse mode, the playback of the next side starts or the playback of the current side stops automatically. 10 ENGLISH • In case of forward playback(“ ”). • At the desired point, press the STOP or corresponding PLAY button. The automatic music search function automatically skips other musics, finds and starts playback from the desired music. Up to 99th music before or after the current music can be searched quickly on the current side. AMS(Automatic Music To rewind To advance SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) TUNING DISPLAY To rapidly advance or rewind the tape, press the corresponding button in the 7 stop mode. • “0000” appears in the tape counter. • When winding or recording the tape, this function is convenient. SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 SYSTEM REMOTE CONTROL UNIT (only for RX-801R) DISPLAY C.RESET In the current position, to reset the TAPE COUNTER to “0000”. 8 To stop playback. 6 EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE DISPLAY • During playback, press the desired button. Example) In case of playback in direction of “ ”. Ex. 1) To playback the program number 4 while playing back the program number 2. Press “ ” button twice. Ex 2.) To playback the program number 3 again while playing back the program number 3. Press “ ” button only once. Automatic music search function might not operate as expected if: • The length of the blank space between two musics is less than 4 seconds. • The noise level of the blank space is very high. • The overall recorded volume level of a music is very low. SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER DISPLAY VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) For the beginning of the current music For the beginning of the next music TUNING 11 ENGLISH • Be sure the erase-protection tabs on the tape are in place. • The type of tape(normal or chrome) is automatically detected. • The metal tapes are not recorded correctly. • ”B” li...

Herunterladen

Geben Sie zwei Ziffern: