Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
NOTICE 60 INDEX 61 REMOTE OPERATION CARD 62 [1] Welcome Features Congratulations on your purchase of the Uniden Cordless Telephone System! This is a “Corded/ Cordless” Telephone unit. The corded handset (on base) can make/receive calls during power failure. You can now place a fully-featured cordless handset anywhere in your home or office where AC power is available to connect the handset charger. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. • 5.8GHz Extended Range Technology • Corded/ Cordless Telephone System • Make and Receive Calls During a Power Failure • Integrated Answering Device • Caller ID and Caller ID on Call Waiting • 50 Caller ID feature • Dual Keypad and LCD Screen at Base • 10 Number Memory Dialing in the Base and Handset • Trilingual Display Options and Voice Prompts (English, French and Spanish) • Intercom Between Handset and Base • Mute and Hold Features • Do Not Disturb (DND) Feature • Clock Display • Base Speakerphone uniden.WELCOME/[2] This series features AutoTalk ™ and AutoStandby ™ . AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, one of more than 10,000 digital security codes is set for your phone. Be sure to visit our web site: uniden.com Uniden ® is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America. Terminology • Standby Mode - The handset may be sitting or off the cradle, but is NOT in use. talk/flash has not been pressed. The corded base handset is on the base and (speaker) on the base has not been pressed. No dial tone is present. • Talk Mode - The handset is off the cradle and talk/flash has been pressed, or pick up the corded base handset or (speaker) on the base is pressed and enabling a dial tone. Talk and Standby Times With average use, your handset battery provides approximately 6 hours of talk time and approximately 10 days of standby time. When your handsets are not being used and are left off of their charging cradles, the battery will gradually discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced respective to the amount of time the handset is off of the charging cradle. [3] TERMINOLOGY Controls & Functions 1. Handset antenna 1 2. Beltclip hole 3. Jack for optional headset 4. Handset battery compartment 5 5. Handset earpiece 2 6. LCD display 7. call id (Caller ID) /menu (P.16, 35) 6 8. /vol/ (volume & scroll) (P.16, 23) 7 14 9. /vol/ (volume & scroll) (P.16, 23) 3 8 15 10. * /tone/ (left cursor) (P. 25, 30) 9 11. redial/pause (P.21, 31) 16 12. select/int’com (P.16, 27) 13. Handset microphone and 4 ringer speaker 10 17 11 18 14. memory ( P.29) 12 19 15. end (P.21, 24) 13 16. talk/flash (P.19, 22, 26) 17. #/ (right cursor) (P. 30) 20 18. rec (record) /remote/call screen (P.47, 50) Retrieve TAD message 19. delete/channel (P.26, 30, 36) with Handset Remote keys 20. Handset charging contacts Play Skip Answering System On Answering System Voice Prompts Stop Delete Repeat uniden.CONTROLS & FUNCTIONS [4] 2122 23 242526 27282930 37 38 39 40 41 42 31 32 33 34 35 36 21. memo/call rec (record) (P. 46, 47) 22. Message LED 23. In use LED 24. ( repeat/rewind) (P.44) 25. call id (P.35) 26. (play/stop) (P.44) 27. LCD display 28. (skip/forward) ( P.45) 29. mem (memory) (P. 29) 30. delete (P.30, 36, 45) 31. Corded base handset 32. Base speaker 33. answer on/off/answer on/off LED (P. 41) 49 50 55 51 52 43 44 45 46 47 48 53 54 34. hold/hold LED (P. 22) 35. mute/mute LED (P.24, 25) 36. Curl cord 37. find hs (handset) /intercom (P.27) 38. clock/menu ( P.13, 39) 39. * /tone/ (left cursor) (P.25, 30) 40. ///select/volume (volume, scroll & select) (P.13, 24, 35) 41. Mic (microphone) 42. #/ (right cursor)(P. 30) 43. greeting (P.42) 44. do not disturb/do not disturb LED (P. 24) 45. set (P.13, 39) 46. redial/pause (P.21, 31) 47. flash (P.22) 48. (speaker) /speaker LED (P. 20, 26) 49. DC IN 9V Jack 50. TEL LINE Jack 51. Base attenna 52. Wall mount adapter 53. Charging contacts 54. Charge LED 55. DC IN 9V Jack [5] CONTROLS & FUNCTIONS Setting up the Phone Do the following steps: A. Choose the best location B. Connect the base unit C. Install the rechargeable battery pack into the handset D. Connect the charger E. Mount the base unit on a wall (if desired) A. Choose the best location Before choosing a location for your new phone, read “Installation Considerations” on page 59. Here are some important guidelines you should consider: Avoid noise sources suc...