Stimmen - 3, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Professional installation of the autopilot system is highly recommended. Specific training in hydraulic pipe-fitting and in marine electrical connections is required to properly install the autopilot system. Read all installation instructions before proceeding with the installation. If you experience difficulty during the installation, contact Garmin Product Support. note: If your boat uses a Mercury® Verado® engine, you must also purchase a Mercury Verado Adapter Kit (Garmin part number 010-11202-00). Contact your local Garmin dealer or Garmin Product Support for ordering information. Product Registration Help us better support you by completing our online registration today. Go to Keep the original sales receipt, or a photocopy, in a safe place. For future reference, write the serial number assigned to each component of your GHP 10 system in the spaces provided on page 2. The serial numbers are located on a sticker on each component. Contact Garmin Contact Garmin Product Support if you have any questions while installing your GHP 10. In the USA, go to support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. In Europe, go to and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. . WARnInGS You are responsible for the safe and prudent operation of your vessel. The GHP 10 is a tool that will enhance your capability to operate your boat. It does not relieve you from the responsibility of safely operating your boat. Avoid navigational hazards and never leave the helm unattended. Always be prepared to promptly regain manual control of your boat. Learn to operate the GHP 10 on calm and hazard-free open water. Use caution when operating the GHP 10 at high speeds near hazards in the water, such as docks, pilings, and other boats. See the Important Safety and Product Information guide in the product box for product warnings and other important information. .CAutIon Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Notice When drilling or cutting, always check the opposite side of the surface. Be aware of fuel tanks, electrical cables, and hydraulic hoses. February 2010 190-01166-02 Rev. B Printed in Taiwan GHP 10 Marine Autopilot System Installation Instructions GHP 10 Package Contents and Tools Needed The GHP 10 autopilot system consists of multiple components. Familiarize yourself with all of the components before beginning installation. You must know how the components operate together in order to correctly plan the installation on your boat. As you familiarize yourself with the GHP 10 components, confirm that your package includes the following items. All the components, except the hydraulic pump, are included in the GHP 10 core box. The pump is packaged separately. If any parts are missing, contact your Garmin dealer immediately. The Main Components The GHP 10 autopilot system consists of five main components: the Electronic Control Unit (ECU), the Course Computer Unit (CCU), a hydraulic pump, the Shadow Drive™, and the GHC™ 10 user control interface. The Course Computer Unit (CCU) The CCU acts as the “brain” of the GHP 10. The CCU contains the sensory equipment used to determine heading and engine speed. The CCU connects to the Electronic Control Unit (ECU), to the GHC 10, and to the tachometer of your boat with a single cable. The CCU also connects to a NMEA 2000® network to communicate with the GHC 10, and to an optional NMEA 2000-compatible GPS device. See page 32. Garmin part number: 010-11353-00 Serial number The Electronic Control Unit (ECU) The ECU connects to the CCU and to the pump. The ECU controls the pump based on information from the CCU. The ECU powers both the CCU and the pump. Garmin part number: 010-11053-00 Serial number The Hydraulic Pump (and motor) The hydraulic pump (and motor) steers your boat by interacting with the hydraulic steering system, based on commands you enter using the GHC 10. The pump is not included in the GHP 10 core package box because the type of pump you use with your GHP 10 is determined by the size and type of steering system on your boat. The pump is in a separate box. The 1.2 L/2.0 L pump is designed for use on a balanced-cylinder steering system, but can be adapted for use with an unbalancedcylinder steering system. The compact 2.1 L pump can be adapted for use on either a balanced-cylinder or an unbalanced-cylinder steering system. The legacy 2.1 L pump can only be used on a balanced-cylinder steering system. See page 19 for more information on using compatible pumps with unbalanced-cylinder steering systems. Garmin part numbers: 010-11097-00 (2.0 L pump), 010-11098-00 (1.2 L pump), 010-11099-10 (compact 2.1 L Pump), and 010-11099-00 (legacy 2.1 L pump - discontinued) Pump model and serial number • • • ...
Dieses Handbuch ist für folgende Modelle:Boote Zubehör - GHP 10V (6.31 mb)