Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Garmin Dateigröße: 1.27 mb Dateiname: 2023_InstallationInstructions.pdf Unterrichtssprache:

This radome utilizes the performance of Garmin radar and provides overlay and color information when combined with a Garmin marine network chartplotter. Product Registration Help us better support you by completing our online registration today! Connect to our Web site at Keep the original sales receipt, or a photocopy, in a safe place. Contact Garmin Contact Garmin if you have any questions while using your Garmin radome. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020 or go to In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK). Note: The Garmin radome has no user-serviceable parts. If you encounter a problem with your unit, please take it to an authorized Garmin NMEA dealer or contact Garmin Product Support for repairs. Packing List Before installing and getting started with your unit, check that your package includes the following items. If any parts are missing, please contact your Garmin dealer immediately. Standard Package: • GMR 18/24 radome or GMR 18 HD/24 HD radome • Power cable • Marine network cable • Field install RJ-45 network cable connector • Mounting kit hardware • Packet of anti-seize compound • Mounting template • Grommet for marine cable Installation Radome Installation The following section covers the installation and setup of the Garmin radome. The Garmin radome only operates with Garmin chartplotters through a Garmin marine network. See your Garmin dealer or the Garmin Web site for more details. To complete the installation, you need the appropriate fasteners, tools, and mounts. These items should be available at most marine dealers. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. When drilling or cutting, always check first to see what is on the other side of the surface. If you experience difficulty with the installation, contact Garmin Product Support or seek the assistance of a professional installer. Installation Guidelines To maximize the performance of the radar, observe the following installation guidelines: • An ideal radome mounting location is high above the ship’s keel line with a minimal part of the vessel’s structure or rigging blocking the radar beam. Obstructions in the path of the radar beam may cause blind and shadow sectors, or generate false echoes. The higher the installation position, the further the radome can detect targets. • Avoid mounting the radome on the same level as smoke stacks, horizontal spreaders, or crosstrees on a mast. Do not install the radome near heat sources where it may be subjected to smoke or hot air from smoke stacks or heat from lights. • The mounting surface or platform should be sturdy enough to support the weight of the radome (GMR 18/18 HD = 7.17 kg/15.8 lbs, GMR 24/24 HD = 9.12 kg /20.1 lbs), as flat as possible, and parallel with the vessel’s water line. • It is recommended that the radar radome be mounted out of range of personnel (horizontal beam width above head height). When the radome is transmitting, do not look directly at the antenna at close range; eyes are the most sensitive part of the body to electromagnetic energy. When properly installed and operated, the use of this radar conforms to the requirements of ANSI/IEEE C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields. • A “Compass Safe Distance” must be maintained between a compass and the radome. The Compass Safe Distance is measured from the center point of the compass to the nearest point on the radome. • Standard compass = 1 m (39 3/8") • Standby Steering and Emergency compasses = 0.5 m (19 3/4" ) 12.5° 12.5° 12.5° 12.5° • Mount other electronics and cables more than 2 m (78 3/4") from the path of a radar beam. A radar beam can normally be assumed to spread 25° vertically above and below the radome’s radiating element. For vessels with higher bow angles at cruise speed, it may be helpful to lower the angle so the beam points slightly downward to the waterline while at rest. Shims may be used as necessary. • Install the radome away from antennas or other electronics. GPS antennas should be either above or below the radar beam path of the radome. Mount at least 1 m (39 3/8") from any equipment transmitting or cables carrying radio signals, such as VHF radios, cables, and antennas. In the case of Single Side Band SSB radios, the distance should be increased to 2 m (78 3/4" ). IEC 60936-1, clause 3-27.1, states maximum distances from the antenna at which RF (radio frequency) levels can be expected. (100W/m squared = 121.92 cm [48"]) (10W/m squared = 274.32 cm [108"]) • The radar radome transmits electromagnetic energy. It is important that the radar is turned off or the DC power input is disconnected when personnel are required to come close to the radome to perform work on the radome assembly or associated equipment. Garmin...

Herunterladen

Geben Sie zwei Ziffern: