Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
for Transmission Input Power Input Shunt (if available) Control Panel Line Fault output Relay (contacts closed to halt radio transmissions) Bell I Alarm output LED Status Indicators (Grn)(Red) AC DC ON / ON OFF / ON Indication AC input is on / DC output is on. Normal. AC input is off / DC output is from Battery only. Step down Transformer is defective or unplugged, or the AC outlet is off. Battery will eventually discharge. ON /OFF AC input is on / DC output is off. The auto-reset overload protector is likely open due to an overload short circuit. OFF /OFF AC input is off / DC output is off. Red Black Battery 12 Volt See Note Features and Specifications subject to change without notice. For Technical Support on the Numerex Technologies Digicell Transceiver, call 888-987-5465. P.O. Box 100 • Hildebran, NC 28637 USA • 828-397-4200 • email: info@elkproducts.com 828-397-4415 FAX ELK PRODUCTS, INC. 03/04 Transceiver Mounting Location for this Model Circuit Board Area V Slide Transceiver Over Mounting Plate to Secure it in Place Place Antenna Grommet Here Q Place Plug Here Secure Mounting Plate Here Transceiver Mounting Location for this Model Circuit Board Area Secure Transceiver with Washer and Nut Here Place Place Antenna Grommet Here Plug Here Place Standoff Here...
Dieses Handbuch ist für folgende Modelle:Boote Zubehör - 982K (356.8 kb)