Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
B Copyright © 2006, 2008 Delta Machinery TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS....................2 SAFETY gUIdELINES - dEFINITIONS.....................3 gENERAL SAFETY RULES .......................................4 AddITIONAL SPECIFIC SAFETY RULES ................5 FUNCTIONAL dESCRIPTION ...................................7 CARTON CONTENTS ...............................................7 ASSEMBLY .................................................................10 OPERATION ...............................................................16 TROUBLESHOOTINg................................................21 MAINTENANCE..........................................................24 SERVICE.....................................................................24 ACCESSORIES...........................................................25 WARRANTY................................................................25 FRANCAIS ..................................................................26 ESPANOL....................................................................50 IMPORTANT SAFETY INSTRUCTIONS Read all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. delta Machinery strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we have advised you. Contact us online at or by mail at End User Services, Delta Machinery, PO Box 2468, Jackson, TN 38302-2468. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4) Information regarding the safe and proper operation of this tool is available from the following sources: • Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at • National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201 • American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 - ANSI 01.1 Safety Requirements for Woodworking Machines • U.S. Department of Labor regulations SAVE THESE INSTRUCTIONS! SAFETY gUIdELINES - dEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always wear NIOSH/ OSHA approved, properly fitting face mask or respirator when using such tools. 2 - English gENERAL SAFETY RULESgENERAL SAFETY RULES Failure to follow these rules may result in serious personal injury. 1. For your own safety, read the instruction manual before operating the machine. Learning the machine’s application, limitations, and specific hazards will greatly minimize the possibility of accidents and injury. 2. Wear eye and hearing protection and always use safety glasses. Everyday eyeglasses are not safety glasses. Use certified safety equipment. Eye protection equipment should comply with ANSI Z87.1 standards. Hearing equipment should comply with ANSI S3.19 standards. 3. Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip protective footwear is recommended. Wear protective hair covering to contain long hair. 4. Do not use the machine in a dangerous environment. The use of power tools in damp or wet locations or in rain can cause shock or electrocution. Keep your work area well-lit to prevent tripping or placing arms, hands...