Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Black & Decker, modell BDCS1807

Hersteller: Black & Decker
Dateigröße: 4.5 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Push the saw slower when this occurs. • Don’t remove saw from work during a cut while the blade is moving. • Allow saw to reach full speed before blade contacts material to be cut. Starting the saw with the blade against the work or pushed forward into cut can lead to stalling or sudden backward movement of saw. • Never attempt to lift saw when making a bevel cut. This leads to blade binding and stalling. • Always secure work to prevent workpiece movement during cut. • Do not try to force saw back on line if your cut begins to go off line. This can cause KICKBACK. Stop saw and allow blade to coast down to a stop. Withdraw from cut and start a new cut on the line. • Set depth adjustment of saw such that one tooth of the blade projects below the workpiece as shown. • Do not back up a rotating blade in the cut. Twisting the saw can cause the back edge of the blade to dig into the material, climb out of the work and run back toward the operator. • Avoid cutting nails. Inspect for and remove all nails from lumber before cutting. • Some wood contains preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials, extra care should be taken to avoid inhalation and minimize skin contact. SAFETY INSTRUCTIONS - LASERS (BDCSL1806 ONLY) DANGER: Laser radiation, avoid direct eye exposure, serious eye injury can result. • Do not use optical tools such as a telescope or transit to view the laser beam. • Position the laser so unintentional eye contact will be avoided. • Do not operate the laser around children or allow children to operate the laser / power tool. • Do not disassemble. Modifying the product in any way can increase the risk of laser radiation. WARNING: Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous laser radiation exposure. • Do not adjust the laser, when the battery is inserted in the circular. • Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. • Store idle product out of reach of children and other untrained persons. Lasers / power tools are dangerous in the hands of untrained users. • Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one laser / power tool, may create a risk of injury when used on another laser / power tool. • Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed by unqualified personnel could result in serious injury. • Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation. 5 90537965 BD Circ Saws 5/30/08 10:11 AM Page 6 • For indoor use only. • This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C). SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: Used without the safety alert symbol indicates potentially hazardous situationwhich, if not avoided, may result in property damage. The label on your laser may include the following symbols. V................................volts mW......................milliwatts nm..............................wavelength in nanometers IIIa..............................Class IIlA Laser The label on your tool may include the following symbols. V ..........................volts A..........................amperes Hz ........................hertz W ........................watts min ........................minutes ......................alternating current ......................direct current no ........................no load speed ..........................Class II Construction ........................earthing terminal ........................safety alert symbol .../min................revolutions or reciprocations per minute 6 90537965 BD Circ Saws 5/30/08 10:11 AM Page 7 SAFETY WARNINGS AND INSTRUCTIONS: CHARGING 1. This manual contains important safety and operating instructions. 2. Before using battery charger, read all instructions and cautionary warnings on battery charger and product using battery. For your convenience and safety, the following labels are on your laser. (BDCSL1806) CAUTION: To reduce the risk of injury, use charger only with this product. Batteries in other products may burst causing personal injury or damage. 3. Do not expose charger to rain or snow. 4. Use of an attachment not recommended may result in a risk of fire, electric shock, or injury to persons. ...