Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Black & Decker Dateigröße: 591.77 kb Dateiname: Unterrichtssprache:

5.2.2. Use a connection cable socket in accordance with the CE Safety Directives. 5.2.3. Check the inlet power supply before powering the machine. See Page 19 Item 3.8.3. CAUTION! * The socket connections have to be made by a qualified electrician, the rotation direction of the saw blade has to be observed by starting the machine. If the saw blade rotates in reverse direction, the socket connections have to be checked and re- connected properly. **If the saw blade rotates in reverse direction, it will cause danger for the operator and the equipment. Figure-3 To correct the rotation direction of the saw blade, insert the electric power socket of the machine to the 3-phase slot, which has been prepared before, and follow these instructions: 1. Press the Motor Start Button to operate the saw blade. 2. Press the cutting head down until the blade guard opens. 3. Press the Stop button. Observe the rotation direction of the saw blade through the open part of the blade guard. 4. The correct direction of the saw blade rotation is shown in Figure 3. If the saw blade rotates in reverse direction: 14 Operating and Safety Instructions The electric socket connections have to be checked and corrected by a qualified electrician. The rotation direction of the saw blade should not be defined before testing. 6. MACHINE SAFETY INFORMATION 6.8.1. It is not allowed to operate the machine with the protective cover and other protective equipment removed. 6.8.2. Your machine operates with 220V/440V ~ 3-Phase 60Hz (400V ~ 3-Phase 50Hz) . Let the electric installation of your machine carry out by a qualified electrician only. 6.8.3. Lifting, installation, electric, pneumatic maintenance of the machine should be carried out by qualified personnel only. 6.8.4. Routine maintenance and scheduled maintenance should be carried out by qualified personnel after unplugging the machine and disconnecting the air supply first. 6.8.5. Ensure that the machine has been cleaned, tested and maintained before starting to operate. 6.8.6. Check the safety devices, power cable and moving parts regularly. Don’t operate the machine before having replaced defective safety devices or faulty parts. 6.8.7. Never replace the saw blade before unplugging first. 6.8.8. Keep foreign materials away from the working area of the machine, keep away from the machine’s moving parts. IMPORTANT The safety data have been defined above. In order to prevent physical damage or damage to the equipment, please read the safety information carefully and keep the manual always in an easy accessible place. 15 Operating and Safety Instructions 7. OPERATION The miter saws PEGASUS / SKAT cut non-ferrous aluminum, PVC profiles and PVC materials. The operator adjusts (manually via knob) the cutting speed of the saw blade according to the material type to be cut. Inner and outer sharp edges of the carbide tipped circular saw blade ensures high quality clean cutting results. The cutting length can be precisely read and adjusted ...

Herunterladen

Geben Sie zwei Ziffern: