Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
• Periodically check that all nuts, bolts and other fixings are properly tightened. • Do not store materials or equipment above a machine in such a way that they could fall into it. • Always hold the saw on parts that are insulated. If you accidentally cut into hidden wiring or the saw’s own cable, the metal parts of the saw will become “live”. Switch off at the mains and remove the plug immediately. • Never saw near combustible liquids or gases. • Note the direction of rotation of the motor and the blade. • Do not lock the movable guard in the open position and always ensure that it is working properly, freely rotating and returning to fully cover the teeth of the blade. • Connect the saw to a dust collection devise and ensure that it is operated properly. As the operator of the saw, please make sure that you understand factors that influence exposure to dust, including the type of material to be machined, the importance of local extraction and the proper adjustment of hoods/baffles/shoots of your dust extraction system. We recommend that you always wear a dust mask when operating this saw. • Wear gloves when handling saw blades and rough materials. • Saw blades shall be carried in a holder wherever possible. • Select saw blades in relation to the material being cut. • Use correctly sharpened saw blades and observe the maximum speed marked on the blade. • Take additional care when trenching (slotting). • The mitre saw can be safely carried by the carrying handle but only once it has been removed from the mains power and secured in the locked down position. • Ensure that the arm is properly secure when bevelling. • Keep the floor area around the machine level, well maintained and free of loose materials. • Ensure that you are trained in the use, adjustment and operation of the machine. • Do not remove any cut-offs from the cutting area until the guard is fully locked in placed and the blade has come to rest. • When cutting long pieces which extend well over the table width, ensure that the ends are adequately supported at the same height as the saw table top. Supports should be positioned in such a way to ensure that the workpiece does not fall to the ground once the cut has been made. A number of supports at regular intervals may be required if the workpiece is extremely long. Wear goggles Wear earmuffs Wear a breathing mask 7 Accessories The GMC LSMS210A and LSMS250A slide compound mitre saws are supplied with the following accessories as standard: • Saw blade (fitted) • Workpiece clamp • 6mm Hex key • Side bars x2 • Dust bag • Instruction manual Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements. 1. Laser light assembly 17. Bevel scale 2. Laser light on/off switch 18. Fence 3. Laser cover 19. Stabiliser bar 4. Laser pitch control (LSMS250A only) 5. Saw arm 20. 6mm Hex key 6. Release knob 21. Mitre table 7. Operating handle 22. Mitre scale 8. Carrying handle 23. Table insert 30. Trenching depth adjustment screw 31. Trenching stop 32. Trenching depth lock nut 33. 45° Bevel adjustment screw 34. 0° Bevel LSMS210A LSMS250A 26 9 9. Upper fixed blade guard 10. Clamp assembly 11. Clamp assembly lock 12. Rotating blade guard 13. Guard retraction arm 14. Blade bolt cover 15. Dust bag 16. Bevel lock (kerf plate) 24. Switch trigger 25. Mitre lock 26. Spindle lock button 27. Dust extraction port 28. Slide bars 29. Slide lock adjustment screw 35. Release latch 36. Side support bars (x2) 37. Side support bar location holes (2 sets) 38. Side support bar locking screws (x2) 33 11 16 34 29 17 28 6 5 2 20 36 4 30 32 15 31 13 27 8 3 10 21 37 24 7 35 14 9 1 12 25 18 22 23 19 38 Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. 1. Remove all loose parts from the carton. 2. Remove the packing materials from around the saw. 3. Using the carrying handle (8) carefully lift the saw from the carton and place it on a level work surface. 4. The saw has been shipped with the saw arm locked in the down position. To release the saw arm, push down on the top of the saw arm, pull on the release knob (6), rotate it 45° and let go, slowly raise the saw arm. WARNING. Do not lift the saw whilst holding on to the guards. Use the carrying handle (8). Transportation Lift the mitre saw only when the saw arm is locked in the down position, the saw is switched off and the plug is removed from the power point. Only lift the saw by the carrying handle (8) or outer castings (Fig. A). Do not lift the saw using the guard or operating handle (7). A Bench mounting The saw base has holes in each corner to facilitate bench mounting (Fig. B). 1. Mount the saw to a level, horizontal bench or work table using bolts (not supplied) and fix the s...