Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Black & Decker Dateigröße: 4.67 mb Dateiname: Unterrichtssprache:

The quicker the brewing process is, the finer the grind used. Coffee that is ground too fine for a particular brewing process will result in bitter, pungent tasting coffee. Coffee that is ground too coarse will result in weak, watery coffee. Grind time and yield: AMOUNT GRIND SUGGESTED TIME . cup (23 grams) Coarse 8 seconds Medium 9 seconds Fine 10 seconds Extra Fine 11 seconds 1/3 cup (31 grams) Coarse 9 seconds Medium 10 seconds Fine 13 seconds Extra Fine 15 seconds . cup (47 grams) Coarse 10 seconds Medium 11 seconds Fine 15 seconds Extra Fine 17 seconds . cup (70 grams) Coarse 12 seconds Medium 17 seconds Fine 27 seconds Extra Fine 30 seconds GROUND COFFEE TIPS • For a cup of rich, full flavored coffee use 1. rounded tablespoons of ground coffee for each 5. oz cup of coffee. • For optimum flavor it is best to grind the amount of coffee needed immediately before brewing. • Do not use the coffee grinder to grind spices or nuts; the coffee will share those flavors. • Blending 2 or more types of beans will result in a richer, more complex brew. • It is important to clean the ground coffee bowl after each use; the residual oils from the coffee will give an off flavor to the next batch of coffee ground. USING THE MINI FOOD PROCESSOR The mini processor is used to chop, mince, mix and puree foods to a smooth consistency. Use the workbowl to chop fresh and cooked fruits and vegetables, fresh herbs, cooked meats, fish and poultry; to make sauces, dressings and salsas; bread, cookie and cracker crumbs. 1. Place the chopping blade on the spindle in the center of the workbowl. With your fingers on the top of the stem of the chopping blade give it a twisting motion while pushing down to make sure it is securely seated on the spindle (Q). Important: Handle grinding blade carefully. It is very sharp. 2. Place up to 1. cups (135 g) of food to be processed into the workbowl. 3. With your fingers on the top of the stem of the chopping blade give it a twisting motion to make sure the food is evenly distributed in the workbowl. 4. Holding the workbowl from the bottom securely insert the bowl up into the center of the bottom of the motor housing with the arrow on the bowl directly under the UNLOCK symbol on the bottom of the motor housing (R). 5. Turn the workbowl clockwise until it locks into position. The LOCK symbol on the housing should be aligned with the arrow on the workbowl. Note: There is a safety feature on this appliance that will not allow the grinder to operate unless the workbowl is securely in place. 6. Plug in the appliance. 7. Press and hold the ON/OFF control button (see Illustration P). To stop the chopper at any time, remove your finger from the ON/OFF button. Important: Process foods no more than a few seconds at a time. Pulsing produces excellent results and offers greater control. 8. When the food is processed to the desired consistency release the ON/OFF button. Important: Be sure chopping blade has completely stopped spinning before removing workbowl from appliance. Q R 9. Hold the workbowl securely and turn it counterclockwise to the UNLOCK position and keeping the bowl level, lower it from the appliance. 10. With your fingers on the top of the stem of the chopping blade, lift it up and out of the workbowl with a twisting motion. Remove food using rubber spatula or simply invert workbowl onto plate, bowl or work surface. 11. Unplug appliance when not in use. HELPFUL TIPS FOR CHOPPING AND BLENDING • The processor works very quickly. Watch carefully to avoid over-processing foods. • For best results, process foods that are about the same size. • Cool cooked foods before processing. • Do not overload the processor by adding more than 1. cups of food in the workbowl at one time. • Use this processor to prepare small amounts of cooked fruits and vegetables for baby food. • Cut hard foods, such as chocolate, whole hard spices and cheese into smaller pieces before processing to avoid damaging the blade. Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. 1. Remove the bowl from the mounted unit by twisting to the unlock position. 2. Carefully remove the blade from the bowl. Important: Blades are sharp. Handle carefully. 3. The coffee grinding bowl, mini food processor workbowl and stainless steel chopping and grinding blades can be washed in hot, soapy water. 4. Always rinse and dry parts thoroughly after cleaning. Important: Although these parts can be washed in the dishwasher, we recommend they be washed by hand to preserve the sharpness of the blades and the appearance of the workbowl. Do not immerse the appliance in water. 5. Wipe outside of appliance with a damp cloth; dry thoroughly. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Grinder stops The ground coffee bowl Make sure the grinding bowl working has disengaged. is correctly inserted into There are too many beans the motor housing. Unplug in the grinding bowl. the appliance and remove...

Herunterladen

Geben Sie zwei Ziffern: