Stimmen - 5, Durchschnittliche Bewertung: 3.2
(
)
)
|
Anleitung Zusammenfassung
1. Remove the processor bowl and lid. 2. Remove the safety cover (2). This can only be done once the processor lid has been removed. 3. Place the blender (8) into its location on the processor body with the handle to the left. Turn counter clockwise until the blender clicks into place and the arrows are aligned. Warning: Use extreme caution blades are sharp. Handle carefully. 4. Place food in blender. 5. Place the blender lid (9) and the measuring cap (10) on the blender. 6. Replace the processor bowl and processor lid. Ensure that the lid tab has clicked into place. The blender will not operate if the processor lid is not clicked in place. 7. Plug in the processor. 8. Always operate the blender with the lid in place. TO REMOVE THE BLENDER, YOU MUST FIRST UNLOCK AND REMOVE THE PROCESSOR LID (A). THEN UNLOCK ANS RMOVE THE BLENDER (B) BYTWISTING CLOCKWISE. WARNING: ALWAYS REMOVE THE BLENDER AND FIT THE SAFETY COVER (2) INTO THE RPOCESSOR BODY (1) WHEN USING THE PROCESSOR. CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty. • Recommended speed levels for blending are between 5 -Max. • Do not overload past the MAX level on the blender. • You can crush 10 oz. of ice cubes in 15-20 seconds in the blender. • To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid. • Avoid contact with moving parts at all times. • Do not blend boiling liquid. • To reduce the risk of severe injury to people or damage to the blender, keep hands, hair, clothing as well as spatulas and other utensils out of container while blending. 9 RE-SETTABLE THERMAL SAFETY DEVICE Your Bravetti Food Processor has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system. Should this occur during use and the appliance stops functioning, follow the re-setting procedure below: 1. Turn the “ON/OFF” speed control (4) to the “OFF” position 2. Unplug the unit from the wall receptacle. 3. Remove and empty either the blender flask or processor bowl (whichever is being used). Ensure that no food is jamming the cutting blades or attachments. 4. Allow the appliance to cool down for a minimum of 30 minutes. 5. Re-install the processor bowl or blender flask and re-plug appliance in the wall outlet. 6. Proceed to use the appliance as before. Should the appliance still fail to operate, turn the “ON/OFF” speed control (4) to the “OFF” position and unplug from the wall outlet. Allow the appliance to cool down for an additional 1 to 2 hours. After this time has passed, repeat the restart procedure, steps 5 and 6 above. 10 CLEANING AND MAINTENANCE CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning. • Never immerse the unit, cord or plug in water or any other liquid. • Clean the motor block with a damp cloth only. • Only the stainless steel blades can be washed in the dishwasher. • All other parts can be cleaned in warm sudsy water using regular dishwashing liquid. • Cleaning the blender jar (flask): * Fill with sudsy warm water. * Place lid on jar. * Run blender at maximum speed for 30 seconds. Rinse and repeat if necessary. Hints & Tips: • The chopping blade (23) can be used for chopping meat, fish, vegetables, cheese, etc. setting the speed to maximum. • For finer chopping, increase the length of time you process. • For coarser chopping, use the pulse button for a few seconds and monitor food texture. • Pre-cut larger pieces to make them fit into the feed tube. When chopping hard foods (e.g. meat, cheese) cut into 1 “/2.4 cm cubes. • For shredding, place food horizontally into the feed tube, for slicing place the food vertically. • When blending, pour the liquids in first and then add the solid food. Begin blending at the lower speed and increase when needed. 11 BP100 ONE (1) YEAR LIMITED WARRANTY EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For Customer Service support, call 1 (800) 7987398 or visit our website If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase date and $14.95 to cover the cost of return shipping and handling must be included.* The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does no...