Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
Save this manual. Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Revised Manual 09k Page 2 SKU 96153 For technical questions, please call 1-800-444-3353. Specifications Construction Case is polystyrene plastic Blades (extra blade included) and Spikes are stainless steel. Dimensions 8” x 7” x 5” Weight 0.8 lb. Save This Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONSFailure to follow all instructions listed below may result in serious injury. SAVE THESE INSTRUCTIONS Keep your work area clean and well lit. 1. Cluttered counters and dark areas invite accidents. Keep children and visitors away while using this product. 2. Distractions can cause accidents. Caution: Sharp spikes and blade can lead to injury. Children must be kept away from this product. Stay alert. 3. Watch what you are doing and use common sense when operating. Do not use while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating could result in personal injury. Dress properly. 4. Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be caught in moving parts. Do not force the appliance. 5. The correct appliance will do the job better and safer at the rate for which it is designed. Do not force or use the appliance for a purpose for which it is not intended. Store idle appliances out of reach of children and other untrained persons. 6. Appliances are dangerous in the hands of untrained users. Maintain appliances with care. 7. Keep blade sharp and clean. Properly maintained appliances with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged appliance. Check for misalignment or binding of moving parts, breakage of parts, and any 8. other condition that may affect the appliance’s operation. Many accidents are caused by poorly maintained appliances. Maintain labels and nameplates on the appliance. 9. These carry important information. If unreadable or missing, contact Harbor Freight Appliances for a replacement. Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Appliances at the number shown on the cover of this manual as soon as possible. Assembly Instructions Press Handle (1) onto Crankshaft (8). Apple Peeler is ready for use.1. Operation Instructions Clean each part with soap and water before using. Dry thoroughly. Caution: Blade and Spikes are extremely sharp. Be careful when working near them. Place Apple Peeler on a clean and level surface and rotate Handle until the Blade is 1. at the bottom position of it’s arc. Push apple down on Spikes (7) and remove Blade Cover (5).2. Turn handle (1) clockwise. Blade will cut peel away from apple, from bottom to top, 3. without further adjustment. When apple is peeled, carefully remove from spikes.4. Clean Blade and carefully replace Blade Cover.5. Changing Blades Put Blade Cover on Blade. Hook finger through loop at top of Blade and pull until 1. the Blade and Blade Cover release. Be wary of the Spikes. Remove Blade Cover and safely dispose of old Blade. Put Cover on new Blade.2. Slide Blade and Cover back onto peeler arm with Blade pointed downwards.3. Cleaning Apple Peeler is 1. NOT dishwasher safe. Clean only by hand with a soft cloth and mild detergent. REV 07i Parts and assembly diagram Part Description 1 Handle 2 Knob 3 Retainer ring 4 Blade Part Description 5 Blade Cover 6 Main Unit 7 Spikes 8 Crankshaft 1 8 4 7 6 5 3 2 The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference appliance only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by...