Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
9 router installation .................................................................................................................... 13 SECTiON 3: OpERATiONS operation overview.................................................................................................................. 14 Workpiece inspection............................................................................................................... 15 Edge Jointing............................................................................................................................ 16 groove Cutting ......................................................................................................................... 17 routing small stock................................................................................................................. 17 Free-hand routing................................................................................................................... 18 SECTiON 4: MAiNTENANCE schedule .................................................................................................................................. 20 Cleaning & protecting .............................................................................................................. 20 SECTiON 5: pARTS table parts............................................................................................................................... 21 Fence parts.............................................................................................................................. 22 WARRANTy AND RETURNS ........................................................................................................ 25 IMPORTANT NOTICE! Table Saw Modifications Required for installation the Model t10222 can be installed on most table saws that have 27" deep tables; however, installation usually requires permanent modification to your table saw or its parts. this modification may include cutting, grinding, drilling, and tapping threads in metal surfaces. read the following to determine which type of modification may be required for your saw: • if your saw table or wing does not have mounting holes that match those in the Model t10222, you will need to drill and tap new holes in the saw table or wing. • if the fence rails on your saw prevent installation of the Model t10222, then you will need to either: —Cut off the ends of the rails (this is the easiest and fastest option). —re-mount the rails farther to the left, which may also require you to drill (and possibly tap) new holes in your table and cut small notches into your rails for access to t-slots in your saw’s table. Before beginning any modification to your table saw or its parts, read the entire assembly section in this manual to make sure the person making the modification is capable of performing the required tasks, and to make sure the Model t10222 will fit your saw. iNTRODUCTiON Manual Accuracy We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writing this manual. However, sometimes we still make an occasional mistake. Also, owing to our policy of continuous improvement, your machine may not exactly match the manual. If you find this to be the case, and the difference between the manual and machine leaves you in doubt, check our website for the latest manual update or call technical support for help. Before calling, find the manufacture date of your machine by looking at the date stamped into the machine ID label (see below). This will help us determine if the manual version you received matches the manufacture date of your machine. Manufacture Date of Your Machine For your convenience, we post all available man- uals and manual updates for free on our website at Any updates to your model of machine will be reflected in these documents as soon as they are complete. Contact info We stand behind our machines. If you have any service questions, parts requests or general questions about the machine, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 E-Mail: techsupport@grizzly.com We want your feedback on this manual. If you can take the time, please email or write to us at the address below and tell us how we did: Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com Tool Description the Model t10222 router table Attachment mounts to most table saws that have 27" deep tables. this addition to your table saw features a universal router mount, a 20" by 27" precision- ground cast iron table with an extruded aluminum fence and a starting pin for contour shaping. the t10222 also features double-cross 3.4" x 3.8" t-slots, an adjustable support leg, and a 21.2" dust port. -2...