Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Tap , then tap Settings. 2. Tap the System tab on the bottom of the Settings screen. 3. Tap the SmartKeeper icon then the Automatic tab. Learn the basics 2-23 4. In the Automatic screen, check the Automatic system backup box to enable automatic backup. This box is checked by default. When SmartKeeper is set to Automatic, make sure that a CF memory card (64MB free space recommended) is present in the CF card slot. 5. Tap OK. NOTE To verify if the CF memory card is usable for system backup, perform a Manual backup first. See the section “To use manual backup” on page 2-27. How the SmartKeeper automatic backup works SmartKeeper is capable of performing the automatic backup process whether your device is in use (ON) or in suspension (OFF). When the device is ON If a low battery status occurs while you are using the device, this message appears, “Battery low! Back up the current system status?” Backing up the “current system status” means that the entire system and all the data in the system main memory are saved as is to the ASUSBKUP.SAV file. For example, you are editing an Excel file when a battery low status occurs and you confirmed to back up. When you restore the system status from the ASUSBKUP.SAV file, you will see exactly the same screen, settings, and system configuration as earlier backed up. 2-24 Chapter 2 To back up the current system status: 1. When prompted, tap the Yes button on the screen message window to start the backup process. a. If you set Flash Disk as your storage device, SmartKeeper saves your current system status to the file ASUSBKUP.SAV in the Flash Disk. This is a 32MB storage space in the device Flash ROM. NOTE Flash Disk is the default setting. b. If you set CF Card as storage device, the backup file is saved in the CF card. Make sure that a CF memory card is present in the slot. If you tap Yes without the CF memory card, an error message appears. Tap No if you do not wish to back up the system status at this time. 2. A confirmation message appears when the backup process is complete. Learn the basics 2-25 When the device is OFF When a low battery status occurs while the device is in standby or OFF, SmartKeeper wakes up the system to back up the system status. • If you selected Flash Disk as your storage device, SmartKeeper automatically backs up the system status to ASUSBKUP.SAV file in the Flash Disk. • If you selected CF Card as your storage device: 1. SmartKeeper checks if a CF memory card is ready in the slot. 2. If found, SmartKeeper backs up the current system status to ASUSBKUP.SAV file in the CF memory card. When the backup process is complete, the system automatically goes back to sleep (OFF). If a CF memory card is not ready in the slot, the device goes back to sleep without performing the backup process. When you turn on the device, either one of the following messages is flashed on the screen. If automatic backup is successful The system detected a battery power low status. The system status was automatically backed up to ASUSBKUP.SAV file in the CF memory card. If automatic backup failed because The system detected a battery power low status and tried to a CF memory card is not ready in back up the system status at the slot 2003/04/08, 10:21:27 AM. Backup failed! CF memory card not ready. The system detected a battery If automatic backup failed because power low status and tried to the CF memory card in the slot back up the system status at may be defective and not 2003/04/08, 10:21:27 AM. Backup accessible failed! Cannot access CF memory card. 2-26 Chapter 2 If automatic backup failed because The system detected a battery power low status and tried to the available space in the CF back up the system status at memory card is not enough to 2003/04/08, 10:21:27 AM. Backup back up the current system status failed! Insufficient space in the CF memory card. If automatic backup failed because The system detected a battery power low status and tried to a system error occurred. back up the system status at 2003/04/08, 10:21:27 AM. Backup failed! System error. To use manual backup: 1. Tap , then tap Settings. 2. Tap the System tab on the bottom of the Settings screen. 3. Tap the SmartKeeper icon, then the Manual tab. 4. Tap the Back up system button to back up the current system status to ASUSBKUP.SAV file in the CF memory card. 5. A message appears to confirm that the backup process is complete. To restore the system status: 1. Tap , then tap Settings. 2. Tap the System tab on the bottom of the Settings screen. 3. Tap the SmartKeeper icon, then the Manual tab. 4. Tap the Restore system button to restore the saved system status from the ASUSBKUP.SAV file in the CF memory card. Learn the basics 2-27 SmartKeeper error messages When backing up or restoring the system status, you may receive any one of the following error messages. The messages tell you the reason why the error occurred. Back up Restore 2-28 Chapter 2 ASUS Backup The ASUS Backup utility lets you back up your syst...