Login:
Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Anleitung 3Com, modell PalmPilot

Hersteller: 3Com
Dateigröße: 303.74 kb
Dateiname: 8e24e336-1d33-474b-994f-653fbfd47e3d.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


However, because MCI works differently, MCI customers need to put the calling card number in the Phone field, and the phone number in the Calling Card field. To enter your server phone number: 1. Tap in the Phone field. The Phone Setup dialog appears, as shown in the following diagram: Enter your ISP phone number here 2. A cursor is displayed at the beginning of the field, showing where new text will appear. Use the stylus to write Graffiti character strokes (or the on-line keyboard) to enter the phone number you use to reach your ISP or dial-in server. Chapter 3: Reference page 41 3. If you are finished, tap OK to confirm your selection and return to the Network Preferences screen. To enter a prefix: 1. Tap the Dial Prefix check box (so that it’s checked). Tap the box again (so that it’s empty) to discontinue this feature. Enter the prefix here Tap here if you need to use a prefix 2. Tap at the beginning of the Dial Prefix field to insert the cursor, then use the stylus to write Graffiti character strokes (or the on-line keyboard) to enter the prefix you need. 3. When you are finished, tap OK to confirm your selection and return to the Network Preferences screen. Disabling Call Waiting Call Waiting can cause your session to terminate if you receive a call while you are connected. If your telephone has Call Waiting, you need to disable this feature before logging in to your ISP or dial-in server. To disable Call Waiting: 1. Tap the Disable Call Waiting checkbox (so that it’s checked). Tap here to disable call waiting Enter the disable code here page 42 PalmPilot Professional Handbook Note: Tap the Disable Call Waiting box again (so that it’s empty) to allow or to enable Call Waiting. 2. Tap at the beginning of the Disable Call Waiting field to insert the cursor, then use the stylus to write Graffiti character strokes (or the on-screen keyboard) to enter the code to disable Call Waiting. Note: Each telephone company has assigned a code to disable Call Waiting. Contact your local telephone company for the code that is appropriate for you. 3. When you are finished, tap OK to confirm your selection and return to the Network Preferences screen. Using a Calling Card The Use Calling Card field enables you to use your calling card when dialing your ISP or Intranet server. Keep in mind that there is usually a delay befor you enter your calling card number. When you define your calling card number, you need to add commas at the beginning to compensate for this delay. Each comma delays transmission of your calling card number for two seconds; it’s a good idea to add either three or four commas. To use a calling card: 1. Tap the Use Calling Card checkbox (so that it’s checked). Tap here to use a calling card Enter the calling card number here Note: Tap the Use Calling Card box again (so that it’s empty) to disable this feature. Chapter 3: Reference page 43 2. Tap at the beginning of the Use Calling Card field to insert the cursor, then use the stylus to write Graffiti character strokes (or the on-screen keyboard) to enter your calling card number. Note: It’s a good idea to add at least three commas at the beginning of your calling card number to compensate for the cue delay. 3. If you are finished, tap OK to confirm your selection and return to the Network Preferences screen. Connecting to your Service Establishing a connection to your ISP or dial-in server is easy; you just tap the Connect button. Remember that you need a third-party application, such as a web browser or news reader, to take advantage of this connection. Note: Check the PalmPilot website (for the latest information about third-party applications that support PalmPilot TCP/IP. To establish a connection: 1. From the Network Preferences screen, tap the Connect button, as shown in the following diagram: Tap here to connect 2. Your PalmPilot will immediately dial the ISP currently selected. The screen will change to display Service Connection Progress messages. Tip To see expanded Service Connection Progress messages, press the Scroll Down button. page 44 PalmPilot Professional Handbook To close a connection: ¦ From the Network Preferences screen, tap the Disconnect button. The connection between your PalmPilot and your ISP is terminated. Creating Additional Service Templates You can create additional service templates by creating new ones from scratch or by duplicating existing templates and editing field values. Once you have created a new or duplicated template, you add and/or edit settings as described. To add a new service template: 1. From the Network Preferences screen, tap the Menu button. The menus for the Network Preferences screen appear. 2. From the Service menu, tap New. A new service template (called Untitled) is added to the Service pick list and displayed in the Network Preferences screen. To duplicate an existing service template: 1. From the Network Preference screen, tap the word Service. The pick list appears, ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien