Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Please see package insert for details. To install the Desktop Manager on your PC: 1.Insert the Rolodex® Electronics Desktop Manager CD into the CD-ROM drive on your PC. The Setup screen appears. If this screen DOES NOT launch automatically, follow these steps. • Go to Start | Run. • Type d:/autorun and press ENTER. 2.Select the Install Rolodex Electronics Desktop manager box. Select your model number if needed. To install Intellisync Mobile Desktop, select the corresponding box. If you are using a serial-to-USB cable, please select the Install the USB Drive box. 3.Select a language, if necessary. Follow the instructions on the screen to install the program. 4.Click the Finish button when done. For information on the Rolodex® Electronics Desktop Manager, please refer to the README file on the CD and the online help in the program. Note: When synchronizing records, you must delete your File Lock on your device if you want your locked files to be synchronized. Please see “Deleting a File Lock” for more information. Replacing the Battery The RT-8212 uses two CR-2032 lithium batteries and the RT-8214 uses 3 CR-2032 lithium batteries. Replace the batteries as soon as the “WARNING LOW BATTERY” message appears. Warning! Please turn the unit off before removing the batteries. When batteries are removed, the unit will revert to the default system settings after a few seconds. Remove and replace batteries one at a time. Make sure you do not accidentally press while changing the batteries. If the unit fails to respond after you change the batteries, press the Reset button located on the back of the unit. Press N to reset the unit without erasing your data. Pressing Y will erase your data. Always keep written records of your important information. If the unit still fails to respond, please remove the batteries and then press and hold the Reset button for approximately two seconds. Reinstall the batteries. Important Note: Pressing the Reset button with the batteries removed will revert the unit to the default system settings. Please have a small Phillips screwdriver and the new batteries at hand before you follow the steps below. 1. Turn the device off and turn it over. 2. With the Phillips screwdriver, remove the screw to the battery cover and then remove the cover. Do not remove the screws at the sides of the device. 3. Remove the old batteries and quickly replace them with the new batteries with the positive (+) side facing up. 4. Replace the battery cover. This unit may change operating modes due to Electro-static Discharge. Normal operation of this unit can be re-established by pressing the reset key, or by removing/replacing batteries. Specifications • Model: RT-8212 Rolodex® • Size: 3 x 1/2 x 4 3/4 in • Weight: approx 5 oz • Battery: 2 CR-2032 Lithium • Memory Size: 1 MB ISBN: 1-59074-276-1 • Model: RT-8214 Rolodex® • Size: 3 x 1/2 x 4 3/4 in • Weight: approx 5 oz • Battery: 3 CR-2032 Lithium • Memory Size: 2 MB ISBN: 1-59074-277-X Cleaning this Product To clean this product, spray a mild glass cleaner onto a cloth and wipe its surface. Don’t spray liquids directly onto the device. Don’t use or store your device in extreme or prolonged heat, cold, humidity, or other adverse conditions. Copyrights, Trademarks and Patents Microsoft, Windows, and Outlook are trade marks of Microsoft Corp. Intellisync is a trademark of Intellisync Corporation that may be registered in some jurisdictions. Copyright © 2004 Intellisync Corporation. All rights reserved. © 2003-2004 Franklin Electronic Publishers, Inc., Burlington, N.J. 08016-4907 USA. All rights reserved. ROLODEX® is a registered trademark of Berol Corporation, a subsidiary of Newell Rubbermaid, Inc. FCC Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Customer Support (609)386-8997 FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfere...