Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Fotos und technische Daten Panasonic EH-HS60 |
Anleitung Zusammenfassung
Avoid water contact! .Do not get the appliance wet. Doing so may result in electric shock, short circuit, or fire. .Do not use with wet hands. Doing so may result in electric shock or short circuit. CAUTION! Prohibited! .Do not touch the steam, the steam outlet, or iron plate. Doing so may result in burns. . Do not bring hands or other exposed skin areas carelessly close to the steam. The steam is not visible, but it can burn you. . Do not remove the tank during use or immediately after use. (Remove the tank only after the appliance has cooled down.) Removing the tank when the appliance is hot may result in burns. . Do not touch the cap when attaching or removing the tank, or immediately after use. Doing so may result in burns. . Do not bring the appliance close to your face with the press plate closed when taking a lock of hair. Doing so may result in burns. To avoid burns, always take a lock of hair with the press plate opened. . Do not release steam in one area for a long period of time. Do not release steam directly against the skin. Doing so may result in burns. .Keep hands away from steam released. Failure to do so may result in burns. . Do not leave the appliance unattended while the power is on. The steam and iron plate are extremely hot and may cause fire or the discoloration or warping of nearby objects. . Do not use the appliance on infants or for anything other than hair. Doing so may result in burns, fires, or damage to the appliance. . Do not drop the appliance or subject it to impact. Do not use the appliance if damaged. Doing so may result in electric shock or the appliance catching on fire. .Do not apply any spray directly onto the appliance. Doing so may result in malfunction or fire. .Do not forcibly open the press plate. Doing so may result in a malfunction. . Do not place or store the appliance in or near plastic or other materials that may melt until the press plate and iron plate have cooled. Doing so may weaken the insulation properties and result in electric shock or fire. Mandatory! .Always grasp the plug while unplugging. Failure to do so may result in electric shock, burns, or fire. .Always throw away water in the tank after use. Failure to do so may result in fire, electric shock, or burns. . If the supply cord is damaged, it must be replaced by the manufacturer, its service center, or similarly qualified persons in order to avoid a hazard. .This product is intended for household use only. English EnglishParts identification210·LOCK210·LOCK . . . . . . . . . . . . . . Parts identification210·LOCK210·LOCK . . . . . . . . . . . . . . • Shaded areas represent heated sections. To avoid burns, do not touch these parts when the hair straightener is turned on. A Switch H Iron plate (inside of the main B Grip body) C Press plate I Tank D Iron plate (inside of the press J Buttons plate) K Tank block E Steam outlet a Felt F Negative ion nozzles b Cap G Lamp c Plug Iron plate Iron plate Switch Negative ions D H Heats up Heats up Released 1 Heats up - Released 0·LOCK The power turns off and the iron plate closes. Filling the tank with water 1 11Pull the tank straight out in a slightly upward direction, while pressing buttons on both sides of the tank. 2 22Open the plug of the tank and soak the felt part inside of the cap (about 5-6 seconds). • The hair straightener may have difficulty releasing steam if the felt is dry. In this case, thoroughly soak the felt (approximately 10 minutes) before use. 3 33Fill the tank with water, and then securely attach the plug. • Use only tap water. (Use of other types of water may damage the hair straightener.) • Be sure not to let dirt get between the plug and tank. (Dirt may cause water leakage.) Wipe off excess water before attaching the tank. (Excess water may cause hot water droplets to be generated.) 4 44Align the tank with the end of the hair straightener and attach it from above. 5 55Push the tank in until a click is heard. .Notes • Note that the surface of the hair straightener becomes hot if used without water. • The hair straightener can be used for approximately 10 minutes on a full tank of water. • Before attaching the tank to the hair straightener, be sure to shake the hair straightener - times with the open (tank) end facing down to drain out any water. Hot water droplets may be discharged if water remains in the hair straightener. English • Replacement of the tank block is suggested after one year (due to clogging of the felt inside the cap). Replacement parts are available at your dealer. Using the hair straightener 1 11Brush your hair to take out any tangles. • This prevents hairs from being cut. 2 22Set the switch to “2”. Once steam is released, take a bundle of hair and clamp it with the press plate underneath the hair. • When straightening bundles of hair at -6 cm widths, pull gently. However, do not take much hair as it may be difficult to straighten your hair. • Clamp the bundle of hair in the center of the iron plate. • Be sure to fi...