Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
- 1 Foot Spa Safety instructions To avoid the risk of fatalities from electric shock: • Make certain that the power cord does not become wet or moist during operation. Place it such that it cannot be crushed or damaged. • Keep the power cable away from hot surfaces. • Do not carry out any repairs on the appliance. All repairs must be carried out by the manufacturer or its service agent or a similarly qualified person. • Unplug the appliance before filling it with water, replacing accessories or cleaning it. • Do not use the appliance in the bathroom. • Never separate or connect the appliance from/to a power supply when your feet are in the water. • Always separate the appliance from the power supply when installing or removing accessory parts. • Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. To reduce the risk of fire or injury: • Only use the original accessory parts for this device. Other parts may probably not meet the safety requirements. • Do not use an external timing switch or a separate remote control system to operate the appliance. • Do not allow individuals (including children) to use the appliance whose physical, sensorial or mental abilities or lack of experience and knowledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage. Tell children about the appliance and its potential dangers so that they do not play with it. • Consult with your doctor before using the foot spa should you be suffering from vein inflammation, inflamed varicose veins, water retention or rashes on your legs. • Take care if you are not sensitive to heat. You may not realise how hot the foot support plate can get. • Never operate the appliance with blocked air- inlet openings. Take care that the air-inlet openings do not become blocked through dust, hair etc. • If water leaks from the appliance, the appliance should no longer be used. To avoid damaging the device: • Do not stand in or on the foot spa. Use it only while seated. • Never operate the foot spa for longer than 20 minutes (KB-Time: 20 Min.). The appliance is not meant to be used continuously for long periods. Allow the appliance to cool sufficiently before using it again. • Do not use any foam-producing bath additives. The appropriate bath additives for bubble baths are available from specialised dealers. • Do not fall asleep whilst using the foot spa. • Place the function switch to 0 (OFF) before you connect or separate the appliance from the power source. • NEVER operate the appliance without water! - 2 Intended Use This foot spa is intended for personal, home use. Its function is only to bathe and massage the feet. It is not suitable for any other purpose. It is not intended for use in the medical/ therapeutic or commercial fields. Delivery Items / Appliance Description Function switch Cover Recesses for accessories: foot pad Recesses for massage accessories Water drainage Roller massager Accupressure massager Finger massager 2 Accupressure accessories 2 Roller massage accessories Operating instructions Technical data Rated voltage:......................220 - 240 V ~ 50Hz Rated output:..................................................85 W CO Time: ....................................................20 min. Protection class:................................................II CO Time The CO Time (Continuous Operation Time) details how long an appliance can be operated without the motor overheat-ing and becoming damaged. After the appliance has run for this period it must be switched off until the motor has cooled itself down. Functions of the Foot Spa This foot spa has three functions available which can be used in various combinations: 1. Bubbles: Air emerging from the air-jets provides the formation of air bubbles, which massage the feet pleasently and gently. 2. Heat: The foot pad heats itself and thus provides for a constant water temperature. 3. Massage: The foot accessories with massage nubs create through vibration a pleasant massage effect. Operation Setup Place the foot spa on the floor in front of a chair. Set the function switch to 0 (OFF). Insert the accessories for the foot pads Select the accessories for the foot pad: -Accupressure accessories with nubs for a gentle vibration massage - Roller massage accessories for an additional point massage of the soles Place the accessories in the recesses provided for them in the foot pad. The accessories for the recesses bear the markings „L“ for left and „R“ for right on their reverse side. - 3 Place massage accessories for the middle console Select a massage accessory for the point massage. Roller massager: stimulating rolling massage of the feet for relaxation of the feet. Accupressure massager: for Shiatsu Massage (Asian finger pressure mas-sage) of the feet. Finger massager: for massaging the feet. ...