Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Conair Dateigröße: 987.53 kb Dateiname: NC01T_ib.pdf Unterrichtssprache:

Always unplug this appliance immediately after using. 2. Do not use while bathing. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in or drop into water or other liquid. 5. Do not reach for an appliance that has fallen into water. Unplug immediately. WARNING– To reduce the risk of burns, electrocution, fire, or injury to persons: 1. Read all instructions before using the appliance. 2. To protect against electrical hazards, do not use while bathing or in the shower. 3. Close supervision is necessary when any appliance is used by or near children or by individuals with certain disabilities. 4. Unplug the appliance from outlet when not in use and before cleaning. Do not leave appliance unattended when it is plugged in. Keep cord away from heated surfaces. 5. Do not operate this appliance with a damaged cord or plug or if the appliance malfunctions or has been dropped or damaged in any manner. Return appliance to nearest service facility for examination, electrical No repairs should 6. Use appliance in this instruction The use of attachments recommended or sold 7. Do not use outdoors or (spray) products are being is being administered. 8. Do not use on a soft surface such as a bed, where openings may be blocked. 9. Do not place or store appliance where it or be pulled into a tub or sink. 10. Do not place in or drop into water or other liquid. 11. If an appliance falls into water, unplug it immediately. Do not reach into the water. Use on any 120 volt 60 hertz AC electric outlet (ordinary household current). Do not use it on any other electrical outlet. SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS CHARGING Your Complete Nail Care Center should be charged using only the charger supplied. Ensure that the switch on the handle is in the "off" position. Connect the appliance to the charger by inserting the small plug at the end of the charger lead into the corresponding socket in the end of the handle. Plug the charger into the mains wall socket. Allow the handle to charge for 16 hours. It is better not to leave the appliance on charge for more than 24 consecutive hours to preserve the longest CORDED USE 1. Ensure that the handle 2. Insert the small plug lead into the corresponding the handle. Plug the charger socket. Wait for one minute, then switch IMPORTANT! Do not use the appliance in this mode for more than 20 minutes. Your Complete Nail Care Center operates AC adapter. Adapter can be plugged into the housing to operate the nail dryer or to recharge the power handle; adapter can also be used to operate the power handle directly by plugging into the bottom of the handle. The power handle has two interchangeable heads. The rotary head works with round attachments that spin in a circular motion and the linear head works with rectangular plates that move in a back-and-forth motion. The rotary head is already attached to the power handle. Pull power handle up to remove from the attachment tray. To change heads: twist the head in a counterclockwise motion and pull up; head comes off. Gently push other head onto plastic base and twist slightly with clockwise motion until head clicks into secure position. To attach discs to attach to the rotary head, insert the white plastic down. To attach plates to the up rounded end of plate and snap plate onto head. remove attachments, simply pull off. Your Complete Nail Care Center contains a number of attachments. The coarser discs and plates are ideal for shaping and eliminating ragged edges for a clean finish. The finer discs, cones and plates smooth unsightly ridges. The polishing cone and disc provide the flawless smooth surface needed for nail polish applications and help polish nails to a healthy-looking luster. To soften nails and cuticles before a manicure, pull out the manicurist’s dish, fill it with warm soapy water and soak your finger tips for a few minutes. Dry your hands thoroughly before using the power handle and attachments. After you have attached a head and an appropriate attachment to the power handle, turn the power handle “on” and carefully start shaping, smoothing or polishing your nails. You can vary the speed at which the attachment moves by turning the speed dial. Slower speeds give you more filing procedure. Your power handle also features a you additional illumination when working Your Complete Nail Care Center includes a dryer which will help shorten fresh nail polish time. Simply insert your hand into the nail dryer, pushing down slightly. That will start the nail dryer. Check nails after a few minutes to see if polish is dry. After using the Complete Nail Care Center several times, you will find the attachment and speed combinations that give you the results you desire. MANICURE 1. Soak your nails in warm soapy water, then dry thoroughly. 2. Decide on the nail shape you want. The three most common nail shapes are round, square, or square with rounded edges. 3. Use the Smoothing Disc/Plate to smo...

Herunterladen

Geben Sie zwei Ziffern: