Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
In Dehumidifying, when the room temperature drops2* higher than the settemperature, regardless the set fanspeed, the air conditioner willintermittently operate in low fanspeed. 1 2 3 4 Turn on the unit Press the ON/OFF button to turn on the unit The LCD display of the wire controller will show the previous working state (except for TIMER, SWING, SLEEP mode). The operation indicator light on the wire controller will light up. Choose of working mode Press MODE button, each press theworking mode will change as thefollowing sequence: AUTO COOLING DEHUMIDIFYING HEATING FAN then choose AUTO, COOLING, DEHUMIDIFYING, HEATING operation. Set temperature Press the TEMP. SET button *Each press , the set temperature willincrease 1 degree. *Each press, the set temperature willdecrease 1 degree. Set the desired temperature. Adjusting FAN SPEED Press the FAN SPEED button, for each press, the fan speed will change as thefollowing sequence: AUTO LOW FAN MED FAN HIGH FAN AUTO Choose the desired fan speed. Turn off the unit Press the ON/OFF button to turn offthe unit. The wire controller only shows the clock and room temperature. 5 Hints: The wire controller can memorize the working condition of each time. Whenstart the unit for the second time, just need to press ON/OFF button, the airconditioner will work according to the previous working mode. (except forTimer, Sleep and Swing) 8 Operation instruction Swing Auto swing ** ** ** ** ** ** ** ** ** **** ** ** **/** Press SWING button, the LCD of the wire controller display “ ”, the louver of the air conditioner begins automatic swing and air sending. Fixed air sending direction When the Auto SWING of the air conditioner swings to an appropriate angle, press SWING button, the display “ ” on the LCD of the wire controller will disappear, the air sending direction is fixed. When fixing the air sending direction, the louver should be kept in the following position: In COOLING and DEHUMIDIFYING, it is better to be upward. In HEATING, it is better to be downward. Always use the SWING button of the wire controller to adjust the louver. If adjust the louver manually, it may damage the louver. During COOLING and DEHUMIDIFYING, do not make the louver downwards for a long time. Because the vapor around the air outlet grille may be condensed and may have drop of water. When the infant, children, ages and the patients use the air conditioner, please pay attention to the set temperature. 9 Operation instruction Sleep operation Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep. Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be out of order. Use of SLEEP function After turning on the unit, setting the working mode, then press SLEEP button to make the air conditioner have the previous Sleep time (powered on for the first time or after performing Sleep is 1h). The Sleep symbol will appear. Press time */* button, you can choose between 1~8h. Each press, it may increase/decrease 1h and will display in the humidity area with “xh”, and display “Timer Off” in Timer Off area and the time to turn off; press Sleep button again to cancel Sleep function. The Sleep symbol disappears. Operation modes 1.In COOLING, DEHUMIDIFYING operation 1 hour later in SLEEP operation, the temperature will increase 1* from the set temperature, another 1 hour later increase another 1*, then the unit will operate continuous for 6 hours, then it turns off automatically. The temperature is higher than set temperature to prevent you from getting a cold. 2.In HEATING operation 1 hour later in SLEEP operation, the temperature will decrease 2* from the set temperature, another 1 hour later increase another 2*, then the unit will operate continuous at this temperature for 3 hours, 1 hour about 3 hours 3 hours decrease 2* increase 1* 1 hour decrease 2* in COOLING* DEHUMIDIFYING operation Set temperature SLEEP operation starts SLEEP operation stops turn off 1 hour about 6 hours increase 1* 1 hour increase 1* Set temperature turn off SLEEP operation starts SLEEP operation stops then it increases 1*, after operating at this in HEATING operation temperature for another 3 hours, the unit will turn off automatically. The temperature is lower than set temperature to prevent you from feeling uncomfortable during sleep. 3.In AUTO operation The air conditioner will perform the relative SLEEP operation according to automatically chosen operation mode. 4.In FAN operation Cannot use SLEEP function ** ** ** ** ** ** ** ** ** **** ** ** **/** Note: lAfter setting Sleep function, it is not permitted to adjust clock. lThe Sleep time is less than 8h, after reaching the set time, the unit will automatically stop. lSet Sleep function after setting “Timer Off” function, the air conditioner will perform Sleep function. lAfter setting Sleep function, the Timer function cannot be set. lSet Sleep function after setti...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AB212BCBAA (600.83 kb)