|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
10_ viewing viewing _11 ENGLISH OPENING THE FRONT PANEL Tightly grab front side of the front panel and lift up the panel to open. Then slightly push the panel up until the panel is hanged over the hooks of the unit. Power button, Room temperature sensor and Humidity sensor You may find the Power button on the right bottom side of the air conditioner. If the front panel is open, you can check the room temperature sensor. You can turn on the air conditioner without the remote control by pressing the Power button. The room temperature sensor measures indoor room temperature. The humidity sensor measures indoor room humidity. Make sure room temperature and humidity sensor does not get damaged. CHECKING THE OUTDOOR UNIT AQV09E..Series/AQV12E..Series AQV18E..Series/AQV24E..Series Humidity sensor Power button Room temperature sensor CAUTION Air Inlet (Rear) Connection Valve Air Outlet Air Inlet (Rear) Connection Valve Air Outlet AQ09E series_IB_E_29980A_11.17.08.indd 11 2008-11-17 14:44:52 viewing your air conditioner CHECKING THE REMOTE CONTROL You can activate the air conditioner by pointing the remote control away from it. When using the remote control, always point it directly at the air conditioner. Remote control display Power Turn on/off the air conditioner. Mode Set one of the 5 operating modes (see pages 14~18 for instructions). Fan • • Adjust how much air flows through the air conditioner with the 5 different fan speeds such as Auto/Silence/Low/Medium/High. Smart Saver Less energy usage makes your space cool between the temperature range of 24.C~30.C. On Timer Set the On Timer on. Off Timer Set the Off Timer on. Set the function on/off. Comfort Care Set the Comfort Care function on/off. Turbo Operate in auto fan speed to cool/warm quicly. Air swing Activate/Deactivate air flow blade movement automatically up and down. Temp .• Increase/Decrease the temperature by 1.C. Evap.CLEAN Evaporator clean function – Dry inside of the indoor unit to get rid of odor. Filter Reset Reset the Filter Clean reminder. Set/Cancel Set/Cancel the timer/ mode. Set the mode on. Time .. Adjust the time for timer/ mode. Temp/Humi • Display the room humidity level and temperature value for 5 seconds on the indoor unit display: -Hi: High (If the relative humidity is 70% or higher) -Sd: Standard (If the relative humidity is lower than 70%) -For room temperature will be displayed the value. • Press and hold this button for 3 seconds to light off the indoor unit display. When you press the button, a short beep will sound and a transmit indicator( ) appears on the remote control display. 12_ viewing Remote control display ENGLISH Using the remote control • Point the remote control towards the remote control receiver of the indoor unit (see page 10 to find the location of remote control receiver). • When you properly press the button on the remote control, you will hear beep sound from Operation mode indicator Set temperature/ time indicator Air swing indicator Low battery indicator Transmit indicator indicator On Timer indicator Off Timer indicator Fan speed indicator Auto (Turbo) Silence Low Medium High Smart Saver indicator Turbo indicator Comfort Care indicatorindicator Silence indicator the indoor unit. • The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps are in the same space. • If other electrical products operate by the remote control, call your nearest contact center. Inserting the batteries 1. Push the lever as arrow 2. Insert two AAA batteries. 3. Close the cover by place it indicates on the rear side Check and match the “+” and back to its original position. of the remote control and “-” signs accordingly. Make You should hear click sound pull up. sure you have inserted the when the cover is locked batteries in correct position. properly. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. viewing _13 14_ operating operating basic function TURNING THE AIR CONDITIONER ON AND OFF Press the Power button on the remote control. You will hear a ringing sound and the air flow blade will move up and down automatically when the air conditioner is properly on. The air conditioner will operate in the most recent operation mode used or Auto mode. When you turn...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQV09EWAX (8.47 mb)
Splitgeräte - AQV12EWAN (8.47 mb)
Splitgeräte - AQV12EWAX (8.47 mb)