Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Samsung Dateigröße: 1.88 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Splitgeräte - ACH1800E1 (1.91 mb)

Splitgeräte - ACH1800E1 (1.93 mb)

Splitgeräte - ACH1800E1 (1.95 mb)

2 Open the front grille by pulling the tabs on the grille. 3 Remove the front grille. 3-1 Remove the safety clips. 3-2 Open the front grille about 45° and pull it forward. 4 Pull out the air filter. 5 Locate the bio-pure filter on the center of air filter. 6 Secure the bio-pure filter with four screws. 7 Reinstall the air filter, the front grille and the safety clips. E-31 ................ yyyyyyyyENGLISH E-32 Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. If the air conditioner is used at... Then... High temperature The automatic protection feature may be triggered and the air conditioner stopped. Low temperature A water leakage or some other malfunction may happen if the heat exchanger freezes. High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for a long periods. Mode Outdoor Temperature Indoor Temperature Indoor Humidity Heating -5°C to 21°C approx. 15°C to 27°C approx. Cooling -5°C to 43°C approx. 21°C to 32°C approx. 80% or less Drying 21°C to 43°C approx. 21°C to 32°C approx. . If the heating operation is used at below 0°C(outdoor temperature) then, does not a full capacity. If the cooling operation is used at over 33°C(indoor temperature) then, does not a full capacity. E-33 Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save your time and expense of an unnecessary call. Explanation/Solution Check that the breaker used for the air conditioner is switched on. Problem The air conditioner does not operate at all Check that there are no obstacles between you and the remote control sensor. Check the wireless remote controller batteries (Refer to page 11). Check that you are close enough to the remote control sensor. (seven metres/yards or less). Check that you are pointing the remote controller at the remote control sensor of the receiver & display unit. Replace the remote controller batteries if necessary. If there is a strong light around the air conditioner, a three-wavelength light, a neon sign, ect., for example, the air conditioner may not be operated with a remote controller. If this happens, use the remote controller close by the remote control sensor. Check that the correct operating mode has been selected. The room temperature may be too low or too high. Dust may be blocking the air filter guard; refer to page 30 for cleaning instructions. Check that there is no obstacle in front of the outdoor unit. Check that the required temperature has been set correctly. Increase the fan speed. The air conditioner does not operate with the remote controller Wireless Remote Controller Wireless Remote Controller No beep is heard when you press (ON/OFF) on the remote controller The air conditioner does not cool or heat When heating, the required room temperature is never reached and the air conditioner frequently stops i...

Herunterladen

Geben Sie zwei Ziffern: