Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Admiral Dateigröße: 3.85 mb Dateiname: Unterrichtssprache:

Maximum air circulation and cooling occur when in the closed position. ON/OFF button The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. MODE button Each time MODE button is pressed, the operation mode is changed in sequence: COOLING FAN ONLY ENERGY SAVING COOLING NOTE: After setting the mode, allow 3 minutes before switching to another mode. FAN SPEED button Used to select fan speed in sequence auto, low, medium and high. TIMER button Used to set or cancel timer operation. When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER. Timer setting range is 0 to 24 hours. If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be canceled. If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel ON TIMER, press TIMER button. Button Used to set room temperature in COOLING mode or used to set time in TIMER mode. If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F. NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F). Indication symbols of LED on control panel: Auto fan speed Cooling F HR Fan only Low fan speed Display set temp Display set timer Medium fan speed Timer High fan speed Energy-saving The above LED lights are shown when the relevant mode is in use. 9 AC 12 10 8 6 MAN final 3/2/05 12:55 PM Page 12 OPERATING INSTRUCTIONS .REMOTE CONTROL 12347 Power Mode +_ Temp/Time Auto Power Saver Mid High Low Timer Fan Speed 1238568456799 Power BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Mode BUTTON Used to select the operation mode. BUTTONS Used to set room temperature in COOLING mode or used to set time in Timer mode. High BUTTON Used to select the high fan speed mode. Mid BUTTON Used to select the mid fan speed mode. Low BUTTON Used to select the low fan speed mode. Auto BUTTON Used to select the auto fan speed mode. Timer BUTTON Used to set or cancel timer operation. Power Saver BUTTON Used to select the Energy-saving mode. ! • When changing modes during operation, sometimes the unit does not always respond at once. Wait three (3) minutes. • Wait three (3) minutes before restarting the appliance. 10 Closed OpenOpen Air Exchanger F HRHR TIMER MODE FAN SPEED OFFOFF ONON/ Signal receptor How to Insert the Batteries Remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Note: Use 2 LR6 AA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. Remote control If the replacement is done within 1 minute, the remote control will keep original presetting. (This function only for LCD remote control) How to Use To operate the room air conditioner, aim the remote control to the signal receptor. The remote control will operate the air conditioner at a distance of up to 23 feet when pointing at signal receptor of indoor unit. 11 OPERATING INSTRUCTIONS .REMOTE CONTROL AC 12 10 8 6 MAN final 3/2/05 12:55 PM Page 13 AC 12 10 8 6 MAN final 3/2/05 12:55 PM Page 14 CARE AND MAINTENANCE When servicing the air conditioner, be sure to turn the mode switch to the "OFF" po...

Herunterladen

Geben Sie zwei Ziffern: