Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Two or more people are needed to move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit. * Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended period of time. * Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. * Make sure air conditioner does not fall during installation. * If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing unit. NOTE: DO NOT USE ANY SCREWS OTHER THAN THOSE SPECIFIED HERE. Preliminary instructions: Do the following before starting to install unit. See illustrations below. Check dimensions of your unit to determine model type: window sash seal Heavy duty Medium Capacity: 22,000-28,500 BTU 15,000-18,500 BTU Unit Height: 18-5/8" 17-5/8" Unit Width: 26-1/2" 23-5/8" Min. Window Opening: 19-1/2" 18-1/2" Min. Window Width: 31" 26-1/2" Max. Window Width: 42" 40-1/2" 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung window. The standard parts are for window dimensions listed above. Open sash to a minimum of 19" (483mm). (FIG.1) 2. Check condition of window: all wood parts of window must be in good shape and able to firmly hold the needed screws. If not, make repairs before installing unit. 3. Check your storm windows: If your storm window frame does not allow the clearance required, correct by adding a piece ofwood as shown (FIG.2), or by removing storm window while room air conditioner is being installed. FIG.1 sash L 19" min 1/2" min inner sill i ■ ' safety lock and 3/4" long hex head screw foam gasket washer head locking screw frame assembly (left) side retainer bottom rail seal to unit 1/2" long screws and locknuts \ *' window support bracket frame assembly (right) sill angle bracket FIG.2 sash r 19" min 1-1/2" min I til storm window frame or other obstruction storm window frame or other obstruction inner sill board thickness as required, along entire inner window sill; fasten to inner sill with two nails or screws. 2020219A0951 1 Installation Instructions 4. Check for anything that could block airflow Check area outside of window for things such as shrubs, trees, or awnings, will not stop proper air flow. 5. Check the available electrical service Power supply must be the same as that shown on the unit serial nameplate. (See Use & Care Guide for serial plate location.) Power cord is 48" long. Be sure you have an outlet near. All models have a 3-prong service plug to provide proper service and safe positive grouding. Do not change plug in any way. Do not use an adapter plug. If your present wall outlet does not match your plug, call a qualified electrician to make the needed change. 6. Carefully unpack air conditioner Remove all packing material. Protect floor or other stable flat surface with covering to prevent scratches from unit. With the aid ofan assistant, remove unit from styrofoam base and rest on protected surface. Move and install unit with the aid ofan assistant. Save packing and shipping box for future unit storage. Inside, be sure furniture, drapes, or blinds Accessory Kit includes • Hardware bag(shipped inside window support brackets) • Foam gasket • Window support bracket (2) • Windowsashseal • Side retainer (2) • Bottom rail seal • Window Filler Panel (2) * Top angle rail * MEDIUM models only HEAVY DUTY top angle rail can be found in carton base packaging (FIG.3) Tools Required • a large flat blade screwdriver • tape measure • adjustable wrench or pliers • pencil • level • Socket wrenches • Phillips screwdriver A WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. 0 230V Grounding Prong Do not, under any circumstances, cut, remove or bypass the grounding prong. HEAVY DUTY (22,000~28,500BTU) TOP ANGLE RAIL FIG.3 Hardware (in plastic bag) Qty. Hardware ( in plastic bag) Qty. 7/16" Locking Screw and Flat H Washerforwindowfillerpanels 2 ea Sill AngleBracket 2 3/4" Long hex head screw 7 <§§£) Long hex-head locking screw for top H angle rail, side retainer 5/16" long 10 Safety Lock 1 Safety Lock V. 1 (forVinyl-Cladwindow) 2 |®_ 1/2" Long Screw and locknut 4 ea Locking screw #10X 1/4" panhead W Phillips screws (for Vinyl-Clad window) 2 Ck. 3/4" Long Flat Head Bolt and Locknut 2 ea ^ weather seals 'W^======^ (6"X3/4"X1/12") 5 foam insert 2 2 Installation Instructions Window Mounting Remove Air Conditioner from Cabinet NOTE: Remove any packaging material from cabinet exterior. 1. Pull down on front grille from upper edge. Lift front grille upwards and place to one side. (See FIG.1) 2. Remove filter. To remove, gras...