Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Panasonic Dateigröße: 3.56 mb Dateiname: CSA18CKPG.pdf Unterrichtssprache:

• Temperature is not displayed on the during AUTO operation. DRY – Soft Dry Operation • A very gentle Cooling Operation, prior to dehumidification. It does not lower the room temperature. • During Soft Dry operation, the indoor fan operates at Low fan speed. HEAT – Heating Operation • Heat is obtained from outdoor air to warm up the room. When the outdoor ambient air temperature falls, the heating capacity of the unit might be reduced. • Defrosting Operation Depending on the outdoor temperature, the operation occasionally stops to melt the frost on the outdoor unit. AUTO • For COOL/DRY operation. Swing up/down automatically. • For HEAT operation When the discharge air temperature is low such as at the start of the heating operation, the air blows at horizontal level. As the temperature rises, the hot air blows in a downwards direction. AUTO AUTO AUTO Horizontal Airflow Direction Indoor Unit Remote Control • For COOL/DRY operation. Swing left/right automatically. • For HEAT operation When the discharge air temperature is low, there is no air swing. When the temperature rises, the horizontal airflow louvers swing left/right automatically. AUTO AUTO Use this air conditioner under the following conditions: DBT: Dry Bulb Temp WBT: Wet Bulb Temp Maximum Temperature-Cooling (Maximum Temperature-Heating) Minimum Temperature-Cooling (Minimum Temperature-Heating) DBT 89.6 (86) 60.8 (60.8) WBT 73.4 (-) 51.8 (-) DBT 109.4 (75.2) 60.8 (23) WBT 78.8 (64.4) 51.8 (21.2) Indoor Outdoor (Unit in ° F) 6 7 SETTING THE TIMER Ensure that the current time is correct before setting the timer. The timer cannot be set if the time display is flashing. ON-TIMER Operation To start the air conditioner operation automatically. • Press 1 to set the operation. • Press 2 to increase or decrease the time. • Then press 3. • To cancel this operation, press 4. OFF-TIMER Operation To stop the air conditioner operation automatically. • Press 5 to set the operation. • Press 2 to increase or decrease the time. • Then press 3. • To cancel this operation, press 4. Timer Mode Operation Details • When the ON-Timer is set, operation will start before the actual set time. This is to enable the room temperature reaches the set temperature at the set time. • Once the ON/OFF Timer is set, operation will start/stop at the set time everyday. • The current time is not displayed when the timers are set. • When both timers are used together, the TIMER mode indicator on the indoor unit remains lit even when the operation is stopped by the OFF-TIMER. CONVENIENCE Sleep Mode Operation To obtain a comfortable sleeping:• Press 6. • Sleep mode indicator on the • To cancel this operation, press Sleep Mode Operation Details • When the room temperature reaches temperature, the airflow volume will change automatically. • Sleep Mode Operation time is 8 hours. • When used together with the timer, the timer has priority. Economy Mode To save electrical Pleas...

Herunterladen

Geben Sie zwei Ziffern: