Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
1 2 3 17. Air Exhaust Outlet Exhaust Hose 18 13 14 17 5 15 16 1 2 3 4 5 6 7 8 9 10 11 12 2. Parts List Display Panel Control Panel Buttons 6 Please Note: Not all controls will require adjustment, as some controls may be designed for other NewAir models. Display Panel Icons 1.Fresh Air Icon (Ionizer) 2.Timer Icon 3.Temperature Display (or Error Code) 4.Cooling Icon 5.Dehumidification Icon 6.Auto-Mode Icon 7.Heating Icon 8.Fan/Speed Icon 9.Air Sweep Icon COOL AUTO DRY SET TIME 88:8 AIR FRESH AIR SWEEP 88 LOCK HOT 9 F 10.On / Off 12.Fan Speed Oscillation Button1 Oscillation Button2 16.Temperature Adjustment 11.Mode 13.Timer 14. 15. MODE SPEED TIMER WIND ON/OFF TEMP/TIME WIND 10 11 12 13 14 15 16 Remote Control 2. Parts List 7 Remove the rear cover by pulling it forward. 1.Oscillation Window 2.Cooling Icon 3.Auto-Mode Icon 4.Output Icon 5.Time Display 6.Operation Icon 7. 8.Mode Button 9.Temperature Button 10.Set Time Button 11.Battery Compartment 12.Battery Cover 13.Fan Icon 14.Dehumidification Icon 15.Remote Signal 16.Temperature Display 17.Oscillation Icon 18.Fresh Air Icon (Ionizer) 19.Oscillation Button2 20.Fan speed Button 21.Power Button Oscillation Button1 Mode Temp Speed Timer on/off 13 14 15 16 17 18 19 20 21 1 2 3 4 5 6 7 8 9 10 Wind Wind F Low Mid High 3.Operating Instructions 8 1.When first plugging in the ACP-1300H, a tone indicating that the power is connected will sound. After pressing the "On" button, the unit will start in Auto Mode and display the current room temperature. 2.To select the mode, press the "Mode" button. This will then cycle the ACP-1300H through the "Auto ,""Heating," "Fan,""Cooling, "and "Dehumidify" options. 3.When adjusting the temperature, keep in mind that the ACP-1300H is adjustable between 60 and 88 F. To set the temperature, press the "Temperature" button until the desired temperature is displayed. The air conditioner will now cool the room to that temperature. After five seconds of setting your desired temperature, the display will then revert back to displaying the current room temperature. O O 4.To adjust the fan speed, press the "Speed button." This will allow the ACP-1300H to cycle through the "High,""Medium," and "Low" speed options. 5. 6. To turn off the unit, press the "Off" button. The air conditioner will cease operation and a tone will sound. 1.For fresh air, press the "Fresh Air" button while the unit is running. This will then engage the built-in ion generator. MODE SPEED TIMER WIND ON/OFF TEMP WIND Please Note: While in dehumidification mode, the unit will automatically set the fan speed to "Low". The ACP-1300H will not allow fan speed adjustments, nor will adjusting the temperature affect the unit's operation. In addition, while in fan mode, adjusting the temperature will not affect the unit's operation. If the ACP-1300H is in standby mode, the remote control's memory function will turn on. Your settings will be stored in the unit's memory, and when used next, it will operate according to the last saved settings only the timer function will need to be reset (if you are using this function). Auto Heating Fan Cooling Dehumidify 3. Operating Instructions 9 Setting the Timer Function: To set the timer function, press the "Timer" button and enter the time that you would like the unit to shut down. You will then have the option of setting the time for the unit to resume function (ranging from half an hour to 12 hours, in half hour increments). You can also exit the timer function at that time. While the unit is in standby mode, you can also set the operation times by pressing the "Timer" button. Enter the time in which you would like the air conditioner to begin operating, and you will then be able to program the time at which you want the unit to go back into standby mode (ranging from half an hour to 12 hours, in half hour increments). You can also exit the timer function at that time (Note: While in the set time frame, the air conditioner will display a countdown of the remaining time until the next mode is initiated). To adjust the airflow, if you would like to have the airflow oscillated from the ceiling to the floor, press the "Oscillation" button on the remote control. Right to left airflow can then be set by manually adjusting the louvers. Please Note: When turning off the unit, VFD indicators will appear "Off" until the sweep shuts down. Battery Installation: 3. Operating Instructions 10 Remote Control Panel Battery Battery Cover Panel 1.Open the battery compartment by sliding down the battery cover panel. 2.Remove and discard old batteries replace with new batteries 3.Replace the battery panel back onto the remote. Please Note: 1.The polarity of the batteries must match the indicator in the remote control. 2.Do not mix old and new batteries in the remote control. 3.To prevent corrosion, remove the batteries if the remote control will not be used for an extended period of time. Water Tank Drainage 3. Operating Instructions 11 When the ACP-1300H is in o...