Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the opera- tional aspects of your new Soleus Air Portable Air Conditioner. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name: ____________________________________________________ Location: ______________________________________________________ Date Purchased: _________________________________________________ Serial Number (located on back of unit): ______________________________ IMPORTANT INSTRUCTIONS Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this manual in a safe place for future reference. 1) Always place the unit on a level surface. 2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual. 3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles. 4) The unit must be connected to a correctly grounded power supply. 5) Do not start or stop the unit by inserting or pulling out the power plug. 6) Do not use an adapter plug or extension cord. 7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool. 8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual. 9) Do not let children play near this unit. 10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service technician. 11) When cleaning the unit, always turn the unit off and unplug the power cord. 3 SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit. • If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature, the air conditioner may not work properly. PACKAGE CONTENTS Portable Air Conditioner Exhaust Hoses (2) Hose Adapters (2) Window Kit Adapter (2) Remote Control AAA Batteries (2) Window Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels) Air Intake and Outlet Covers (2) Owner’s Manual MODEL LX-100 & LX-100BL / LX-120 & LX-120BL COOLING CAPACITY 10,000 BTU/H / 12,000 BTU/H HEATING CAPACITY 1350 Watts / 1350 watts DEHUMIDIFYING CAPACITY 50 pts/Day / 60 pts/Day POWER COOLING 1020 W / 1350 W HEATING 1350W / 1350W AIR FLOW VOLUME 225 CFM POWER SOURCE 115 V~ 60 HZ 9/12 AMP / 12/12 AMP COOLING/HEATING SOUND PRESSURE LEVEL 46 dB(A) NET WEIGHT 76 Lbs / 82 Lbs OPERATING TEMPERATURE COOLING 60.8.-107.6. HEATING 23.-89.6. DIMENSIONS ASSEMBLED 17.5” W .32.75” H .19” D PACKAGE 22.4” W .34.44” H .19.88” D REFRIGERANT R22 PRODUCT DIAGRAM Control Panel Louvers Signal Receptor Casters FilterCompartmentAirIntakeCover/Filter PARTS & ASSEMBLY PARTS EXHAUST HOSES WINDOW KIT ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air out of the room to complete the air exchange. When the unit is operating in fan or heater modes, no outdoor air exchange takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan or heater. NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long (approximate length). MOUNTING THE EXHAUST HOSES • Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove packaging and locate components. • Extend both ends of the exhaust hoses approximately 6 inches. • Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto the other end of the exhaust hose clockwise. Repeat on the other exhaust hose. • Remove outlet covers from the back of the unit by screwing them counter-clockwise, then lifting up. • Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place. DUAL HOSE WINDOW KIT INSTALLATION CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL & MULTI-COLOR DISPLAY CONTROL PANEL TEMP & TIMER SELECTION POWER BUTTON MODE BUTTON TIMER BUTTONS FAN SPEED BUTTON SWING(LOUVEROSCILLATION) MULTI-COLOR DISPLAY AUTO A/C DEHUM. FAN HEAT FAN SPEED TIMER ON TIMER OFF TEMPERATURE AND TIMER INDICATOR OSCILLATION ON/OFF COMPRESSOR ON/OFF EMERGENCY SLEEP MODE ON/OFF CONDENSATE- BUCKET FULL OPERATING INSTRUCTIONS CO...