Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Dimplex Dateigröße: 694.31 kb Dateiname: b0e8c55d-cd9b-47f4-9113-77341f69c557.pdf Unterrichtssprache:

L W H a L W H CAB 10 E/W/A 1065 320 262 CAB 15 E/W/A 1569 320 262 DAB 10 E/W/A 1057 391 361 DAB 15 E/W/A 1557 391 361 b 1 2 'x' A B CAB 10 920 160 CAB 15 1425 160 DAB 10 920 230 DAB 15 1425 230 A B 2.0m Min. 8 7 9 CAB ‘E’ & DAB ‘E’ CAB ‘A’ & DAB ‘A’ CAB ‘W’ & DAB ‘W’ Y X X Y CAB 10 840 240 CAB 15 1260 240 DAB 10 800 300 DAB 15 1300 300 Dimplex Compact Air Curtains Models : CAB10E, CAB15E, CAB10W, CAB15W, CAB10A, & CAB15A DAB10E, DAB15E, DAB10W, DAB15W, DAB10A, & DAB15A IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLYAND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY ADVICE DO NOT COVER OR OBSTRUCT the air inlet or outlet grille. ENSURE THE APPLIANCE IS EARTHED. Do not use this heater in areas where excessive dust exists. This heater must not be located immediately above or below a fixed socket outlet or connection box. Always disconnect supply before working on the product. This appliance should only be connected to the fixed wiring of the premises by means of conduit. This product should be mounted safely to solid wall or ceiling surfaces only. This product must not be subjected to water spray or immersion. Ensure the supply cables are of adequate current carrying capacity and are protected by a suitable fuse. If the appliance is mounted in a toilet or washroom, the appliance should be mounted such that no part of it can be touched by a person using a fixed bath or shower. If the appliance is mounted in a toilet or washroom an isolating switch must be provided outside the washroom adjacent to the entrance door. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety. WARNING: Isolate electrical supply to ALL modular linked units when carrying out maintenance. Models Model Heat output kW Electrical Supply Electrical load (per phase) Weight kg Max Installed height m AMBIENT / COLD STORE CAB10A n/a 220-240V ~1PN 0.3 15.5 3.0 CAB15A n/a 220-240V ~1PN 0.5 21.5 3.0 DAB10A n/a 220-240V ~1PN 1.5 21.5 4.0 DAB15A n/a 220-240V ~1PN 2.3 27.5 4.0 ELECTRICALLY HEATED CAB10E 4.5 / 9.0 380-415V ~3PN 14 20.5 3.0 CAB15E 6.75 / 13.5 380-415V ~3PN 20 29 3.0 DAB10E 6.0 / 12.0 380-415V ~3PN 18 26.5 4.0 DAB15E 9.0 / 18.0 380-415V ~3PN 27 35 4.0 WATER HEATED (at 82/71 °C - LPHW)** CAB10W 9.0 220-240V ~1PN 0.3 17.7 3.0 CAB15W 13.5 220-240V ~1PN 0.5 24.6 3.0 DAB10W 12.0 220-240V ~1PN 1.5 24.7 4.0 DAB15W 18.0 220-240V ~1PN 2.3 31.9 4.0 Electrical The installation of this appliance should be carried out by a competent electrician and be in accordance with the current IEE wiring regulations. Fixing Positions This appliance may be either wall-mounted or fixed to a ceiling see Fig. 3a & 3b for fixing positions and ‘Mounting’ sections below for fixing details. A minimum distance of 100mm is required from the top of the appliance to ceiling - se...

Herunterladen

Geben Sie zwei Ziffern: