Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
SNMP: You can set up to 3 SNMP Communities. Click Save to save and activate any configuration changes. Click Cancel to cancel the changes. 19 NetBEUI Protocol The NetBEUI Protocol page allows you to configure the NetBEUI setting of the Print Server. Workgroup: Enter the name of your NetBEUI workgroup. Maximum Limitation: Set the maximum limitation for Connected Stations and Number of Sessions. Click Save to save and activate any configuration changes. Click Cancel to cancel the changes. 20 AppleTalk The AppleTalk Protocol page allows you to configure the AppleTalk setting of the Print Server. AppleTalk Zone: Enter the name of your AppleTalk Zone. USB: Enter your printer type. PostScript Level: Select your PostScript level. Font Group: Select your Font Group. Click Save to save and activate any configuration changes. Click Cancel to cancel the changes. Note: If you are using Mac OS X, you can use Rendezvous to connect to the Print Server. For more information on how to use Rendezvous, please see Section 10.1, Using Rendezvous. 21 9.3 Tools Click on Tools to display the Tools page. Print Test The Print Test page allows you to perform a low-level print test, which bypasses the operating system layer. The test page is sent directly from the Print Server to the printer. This allows you to test the compatibility of your printer with the Print Server. Select the port that the printer is connected to and click on the Test button. Your printer should print out a test page. If not, verify that the printer is powered on and all cables are securely connected and try again. If the printer still fails to print a test page, please check the printer compatibility list on our web site at for a list of compatible printers. If your printer is not on the list, it may not be compatible with the Print Server. 22 Reset The Reset page lets you reset the Print Server without changing the setting back to factory default. Click on the Yes button to reset the Print Server. Factory Reset The Factory Reset page lets you reset the Print Server’s setting back to factory default. 9.4 Help Click on Help to display the Help page. About The About page displays the Print Server’s firmware version number. 23 10. Printing in Mac OS This section describes how to set up your Mac OS settings to work with the Print Server. 10.1 Using Rendezvous Mac OS X provides a new feature called Rendezvous. Rendezvous is a networking technology standard that lets you create an instant network of computers and devices to share files and printers and even contact other people on the network. For the printer connection, the Mac OS X Print Center application uses Rendezvous to discover Rendezvous-enabled printers on the network. When you add your computer to a network, Print Center automatically discovers any available printer. All you have to do is select the one you want to use and then start printing. You can add a new printer to the network and all the users on the network will see the new printer automatically appear in their Print Center without any configuration. The following instructions provide a common way of using Rendezvous: Step 1 Launch Print Center. Press and hold the Option key and click the Add button. 24 Step 2 Select Rendezvous from the pop-up menu. Step 3 A list of Rendezvous-enabled printers will appear in the list. 25 Step 4 Choose the desired printer and select Generic. Step 5 The printer is installed into the system successfully. 26 10.2 Setting AppleTalk/LPR Printing If you want to use AppleTalk or LPR printing instead of Rendezvous, Follow the instructions below. For Mac OS X Step 1 After attaching the Print Server to your network, change the IP Address of your Macintosh computer in order to access the Print Server’s Web Configuration Utility. The default IP Address of the Print Server is 192.168.1.254. Change your IP Address to 192.168.1.x, where x is any number between 2 and 200. Step 2 Open the System Preference window and click Network. In the Network window, select the AppleTalk tab and check the Make AppleTalk Active check box. 27 Step 3 To print, open a document and select File > Print from the menu. Step 4 Select Edit Printer List from the Printer dialog box. Step 5 Click Add Printer and then select the desired printing protocol (AppleTalk or LPR Printers using IP). 28 AppleTalk: After selecting AppleTalk, the Port Name of the Print Server will be displayed. Select the Port to which the PostScript printer is connected. Then, select the printer model from the dialog box. Click Add Printer to complete the Printer Port configuration. Select the Printer Port just configured in the Print window. Click Print to print your document. LPR Printers using IP: When you select LPR Printers using IP Protocol, type the IP Address of the Print Server into the LPR Printer’s Address field. In the Queue Name field, type in the Print Server’s port name that the PostScript printer is connected to. Select the printer model from the di...